Hi John,
I found the link and installed the program for the K2AT. Now, I just
need to wait for the cable to come.
Thank you for the guidance.
God bless,
Mark
-- Currently in Pendleton, Eastern Oregon Regional At Pendleton, Oregon
Clear, 77.0°F Wind:WNW-29
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, August 02, 2008 5:55 PM
Subject: Re: USB Cable for K2AT?
> yes it's free from Kenwood's site. Finding it is a bit of a challenge
> these
> days, but it is there. It often takes me a few minutes to find it these
> days
> though, the downloads link isn't near as obvious as it once was.
> ----- Original Message -----
> From: "Mark" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, August 02, 2008 8:49 PM
> Subject: Re: USB Cable for K2AT?
>
>
>> Hi John,
>> I decided that with what you said about the cables working for more
>> than one radio I better hurry up and by one. I got a USB programming
>> cable
>> on EBay for $10.98 including shipping from Honkong. I believe I read that
>> the software to program the radio is available for download from Kenwood?
>> Thanks for the information.
>>
>> God bless,
>> Mark
>> -- Currently in Pendleton, Eastern Oregon Regional At Pendleton, Oregon
>> Clear, 80.1°F Wind:W-280° at 17mph gusting to 23
>> ----- Original Message -----
>> From: "John Miller" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Saturday, August 02, 2008 4:59 PM
>> Subject: Re: USB Cable for K2AT?
>>
>>
>>> The serial cable is 100% the same one, I don't see why there'd be any
>>> difference just because it's USB. It should still work for both.
>>> ----- Original Message -----
>>> From: "Mark" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Saturday, August 02, 2008 7:55 PM
>>> Subject: USB Cable for K2AT?
>>>
>>>
>>>> Hi
>>>> I was just on EBay looking at USB cables to program my K2AT. I =
>>>> found programming cables alright but they did not say they were USB. I
>>>> =
>>>> did find USB programming cables for the F6A though. Interesting thing
>>>> is
>>>> =
>>>> that the cables that say they are for the K2AT also say they are for
>>>> the
>>>> =
>>>> F6A but the ones that say the are for the F6A don't say they are for =
>>>> the K2AT. So are they inter changeable?
>>>> Thank you for your help.
>>>>
>>>> God bless,
>>>> Mark
>>>> --=20
>>>> Currently in Pendleton, Eastern Oregon Regional At Pendleton, =
>>>> Oregon Clear, 79.0=B0F Wind:WNW-290=B0 at 16mph gusting to 22mph=20
>>>> Created by Weather Signature v1.20 =95 http://www.weathersig.com
>>>> God loves you!
>>>>
>>>>
>>>> =20
|