Basically what I meant was, if I"m on the main band when I go in to cross
band mode, is that the receive frequency or transmit? like how do I know if
the sub band or main? or does it do it all with in main or sub?
It says in the manual if you're using 1 antenna for 2 and 440 it may not
work well with cross band but I'm one that would try it anyway and I'm sure
it won't be a problem.
----- Original Message -----
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, January 16, 2008 10:28 PM
Subject: Re: cross band repeat with the TS-2000
> yeh i do it all the time on the ts-2000.
> I never ever use the control button...i find it just complicates matters
> too
> much...
> anyway, just set your rx and tx frequencies on the main and the sub VFO's
> ,
> it doesn't mattter which is which.
> Then go to the menu, i think its the last one, you can look it up though,
> and set menu A to C and you'll be in cross band mode. All the functions
> of
> the radio except the send button, volume and squelch are disabled in
> cross
> band mode.
> And i'm not sure what you mean in that you can't use a dual bander for
> cross
> band repeat on the ts-2000...it works just fine.
> my dual bander doesn't have any problems with receiving on one band while
> transmitting on the other, and the radio functions just fine that way.
> No bleed over or desensatization or anything.
> The reason i don't use the control button or function is that I find it
> easier just to switch between the main and sub with the right and left
> arrow
> keys beside the main tuning dial.
> If you have a particular set of frequencies that you want to cross band
> on,
> you can put them into memory as well.
> Also, you can cross band in simplex or with the tx offset on each
> side...for
> instance if you want to link a VHF and UHF repeater with their own TX and
> RX
> frequencies, but be able to hear the output of each as well, you can do
> that.
>
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, January 16, 2008 7:57 PM
> Subject: cross band repeat with the TS-2000
>
>
>> Has anyone done cross band repeat on the TS-2000? If so, which band
>> should
>> be which? Should the band you have control of be receive or transmit?
> Just
>> wondering in case I want to give that a shot. I know you're not supposed
> to
>> be able to do that with a duel band antenna on that radio but I have a
>> couple others I can use for receive if I decide to do it.
>> John Miller N1UMJ
>> AIM and yahoo messenger: N1UMJ Skype: n1umjjohn
>> home page:
>> http://home.comcast.net/~n1umj/wsb/html/view.cgi-home.html-.html
>> myspace: http://www.myspace.com/n1umj
>>
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.516 / Virus Database: 269.19.5/1228 - Release Date:
>> 1/16/2008
> 9:01 AM
>>
>>
>
|