Chris,
I think the Th-f6a may have the same DTMF codes in the manual. you can find
the manual at
http://www.icanworkthisthing.com
Fred Olver n9bso
----- Original Message -----
From: "Chris Schulte" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, December 16, 2007 1:51 PM
Subject: Re: sky command codes in text format
> No, I don't have the html stuff from this list, is there a link that you
> could quick pass along to me?
> 73,
> Chris, w8cjs
> ----- Original Message -----
> From: "Butch Bussen" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, December 16, 2007 12:18 PM
> Subject: Re: sky command codes in text format
>
>
>> It is in the manual, I'll have to look when I get back to Vegas. This
>> is not the same as sky command. This is wireless remote, not the same
>> thing at all. I think perhaps this is what is causing some confusion.
>> If you have the html manual that was put up on this list, wireless stuff
>> is in there.
>> 73s
>> Butch Bussen
>> wa0vjr
>>
>> On Sat, 15 Dec 2007, Chris Schulte wrote:
>>
>>> That's what I'm looking for, the dtmf codes to remotely control the
>>> radio.
>>> I know a friend that has a v7 and he uses his hand held to control it
>>> remotely using dtmf codes, I was hoping that someone on this list would
>>> know
>>> how to do the same thing with the 71. I looked in the manual, and
>>> there's
>>> really not a lot on how to do that. Thnaks and 73,
>>> Chris, w8cjs
>>> ----- Original Message -----
>>> From: "Colin McDonald" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Friday, December 14, 2007 11:13 PM
>>> Subject: Re: sky command codes in text format
>>>
>>>
>>>> I don't think the v71 has a built in tnc.
>>>> though i may be wrong.
>>>> the d7a has a built in tnc and dual band tx and rx capabilities.
>>>> the only other radio that kenwood makes that can be used with sky
>>>> command
>>>> and the ts2000 is the tm D700.
>>>> However, if the v71 is anything like the v7a, or the d700 or the
>>>> ts2000,
>>>> they can all be controled on a very limited basis with dtmf codes.
>>>> I haven't looked in a long time, and I haven't used the feature in a
>>>> long
>>>> time, but I know you can control certain functions remotely by using
>>>> the
>>>> dtmf codes for the ts2000 and the v7a...not sure about the v71.
>>>> 73
>>>> Colin, V A6BKX
>>>> ----- Original Message -----
>>>> From: "Chris Schulte" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Friday, December 14, 2007 9:04 PM
>>>> Subject: Re: sky command codes in text format
>>>>
>>>>
>>>>> So then I need a tnc for both the th7 and v71? For that matter, I
>>>>> need
>>>> one
>>>>> or both rigs hooked to a computer? I just want to know how it's all
>>>>> going
>>>>> to work. If I have to get the th7, that's not a problem, heck, it's
>>>>> actually cheapper.
>>>>>
>>>>> ----- Original Message -----
>>>>> From: "Anthony Vece" <[log in to unmask]>
>>>>> To: <[log in to unmask]>
>>>>> Sent: Friday, December 14, 2007 10:49 PM
>>>>> Subject: Re: sky command codes in text format
>>>>>
>>>>>
>>>>>> Hi Chris;
>>>>>>
>>>>>> The F6A will not do what you want it to do.
>>>>>>
>>>>>> The Sky Command control codes are transmitted with a TNC.
>>>>>>
>>>>>> They are not transmitted with touchtones and or DTMF tones.
>>>>>>
>>>>>> The handheld that will work is the TH-D7A.
>>>>>>
>>>>>> The D7A has a built-in TNC.
>>>>>>
>>>>>> 73 De Anthony W2AJV
>>>>>> [log in to unmask]
>>>>>> ECHOLINK NODE NUMBER: 74389
>>>>>>
>>>>>> ----- Original Message -----
>>>>>> From: "Chris Schulte" <[log in to unmask]>
>>>>>> To: <[log in to unmask]>
>>>>>> Sent: Friday, December 14, 2007 5:06 PM
>>>>>> Subject: sky command codes in text format
>>>>>>
>>>>>>
>>>>>>> Ok, I'm not sure if Kenwood calls it sky command, or sky commander,
>>>>>>> and
>>>> =
>>>>>>> being as how I'm too lazy to look in my tmv--71 manual or my ts-2000
>>>>>>> =
>>>>>>> manual for the exact name of it, I figured if I made a mistake, I'd
>>>>>>> be
>>>> =
>>>>>>> forgiven. =20
>>>>>>>
>>>>>>> Anyway, does anyone have the control codes for sky command in a text
>>>>>>> =
>>>>>>> format that is readable? I was looking at it in my tmv-71 manual a
>>>>>>> few
>>>> =
>>>>>>> days ago, and I can't for the life of me read or understand that
>>>>>>> table
>>>> =
>>>>>>> that is in there. =20
>>>>>>>
>>>>>>> I'm going to be purchasing the THF6A in late january, and want to be
>>>>>>> =
>>>>>>> able to use it to remotely control the 71a. Thanks for any help,
>>>>>>> Chris, w8cjs
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> No virus found in this incoming message.
>>>>> Checked by AVG Free Edition.
>>>>> Version: 7.5.503 / Virus Database: 269.17.2/1184 - Release Date:
>>>> 12/14/2007 11:29 AM
>>>>>
>>>>>
>>>>
>>>
>>
>
|
