The TMd710 that replaces the TMd700 can be used as well I'm told.
----- Original Message -----
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, December 14, 2007 11:13 PM
Subject: Re: sky command codes in text format
>I don't think the v71 has a built in tnc.
> though i may be wrong.
> the d7a has a built in tnc and dual band tx and rx capabilities.
> the only other radio that kenwood makes that can be used with sky command
> and the ts2000 is the tm D700.
> However, if the v71 is anything like the v7a, or the d700 or the ts2000,
> they can all be controled on a very limited basis with dtmf codes.
> I haven't looked in a long time, and I haven't used the feature in a long
> time, but I know you can control certain functions remotely by using the
> dtmf codes for the ts2000 and the v7a...not sure about the v71.
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "Chris Schulte" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, December 14, 2007 9:04 PM
> Subject: Re: sky command codes in text format
>
>
>> So then I need a tnc for both the th7 and v71? For that matter, I need
> one
>> or both rigs hooked to a computer? I just want to know how it's all
>> going
>> to work. If I have to get the th7, that's not a problem, heck, it's
>> actually cheapper.
>>
>> ----- Original Message -----
>> From: "Anthony Vece" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, December 14, 2007 10:49 PM
>> Subject: Re: sky command codes in text format
>>
>>
>> > Hi Chris;
>> >
>> > The F6A will not do what you want it to do.
>> >
>> > The Sky Command control codes are transmitted with a TNC.
>> >
>> > They are not transmitted with touchtones and or DTMF tones.
>> >
>> > The handheld that will work is the TH-D7A.
>> >
>> > The D7A has a built-in TNC.
>> >
>> > 73 De Anthony W2AJV
>> > [log in to unmask]
>> > ECHOLINK NODE NUMBER: 74389
>> >
>> > ----- Original Message -----
>> > From: "Chris Schulte" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Friday, December 14, 2007 5:06 PM
>> > Subject: sky command codes in text format
>> >
>> >
>> >> Ok, I'm not sure if Kenwood calls it sky command, or sky commander,
>> >> and
> =
>> >> being as how I'm too lazy to look in my tmv--71 manual or my ts-2000 =
>> >> manual for the exact name of it, I figured if I made a mistake, I'd be
> =
>> >> forgiven. =20
>> >>
>> >> Anyway, does anyone have the control codes for sky command in a text =
>> >> format that is readable? I was looking at it in my tmv-71 manual a
>> >> few
> =
>> >> days ago, and I can't for the life of me read or understand that table
> =
>> >> that is in there. =20
>> >>
>> >> I'm going to be purchasing the THF6A in late january, and want to be =
>> >> able to use it to remotely control the 71a. Thanks for any help,
>> >> Chris, w8cjs
>> >>
>> >>
>> >
>>
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.503 / Virus Database: 269.17.2/1184 - Release Date:
> 12/14/2007 11:29 AM
>>
>>
>
|
