BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Transfer-Encoding:
7bit
Sender:
For blind ham radio operators <[log in to unmask]>
Subject:
From:
Colin McDonald <[log in to unmask]>
Date:
Thu, 3 Apr 2008 12:05:33 -0600
Content-Type:
text/plain; charset="iso-8859-1"
MIME-Version:
1.0
Reply-To:
For blind ham radio operators <[log in to unmask]>
Parts/Attachments:
text/plain (147 lines)
one of those RCA jacks is probably for recording out.
Its better to run a studio mike into the front mike jack because the
impedance will match up better.  Some of the older yaesu's had back pannel
mike jacks and even balanced modulator inputs...but definitely better to use
the front panel jack since it will be expecting a Low Z, or typical 600 ohm
mike input.
73
Colin, V A6BKX
----- Original Message ----- 
From: "Shaun Oliver" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, April 03, 2008 3:39 AM
Subject: Re: Microphone question


> just on mikes, on the back of my yaesu, there's what looks like a cannon
> plug.
> as you're looking at the back of the radio. with the back facing you so
> that the so239 is on your left, on the right hand side of the back
> pannel there are some plugs in a virtical line.
> the top two are RCA and I suspect one of them is for a phone patch. I'm
> not too sure what the other is for. there is a 3.5 MM headfone jack
> which I have an external speaker connected to. there's a quarter inch
> jack for a straight key and this 8 pin thing underneath that. could the
> 8 pin plug be for a studio or vocal mike of some description? or, could
> I attach something to the phone patch and make use of the audio from
there?
> thanks in advance.
> rig is a yaesu ft201
>
> Shaun
> web sites:
> http://www.myspace.com/blindmanshaunoliver
> http://blindman.homelinux.org/~blindman/
> skype: brailledude
>
>
> On 3/04/2008 8:15 PM, the old scribe known as Colin McDonald was able to
> impart this pearl of wisdom:
> > any studio mike will sound pretty decent on SSB.
> > Most studio mikes, even the cheap ones will give you an audio frequency
> > range of at least 50HZ to 16KHZ.
> > Since your typical 2.7K maximum band width on ssb will be quite a bit
> > narrower then that, you can be sure that the mike will give a good flat
> > response within the bandwidth that  the radio puts out.
> > Audio technica, V-tech, AKG, CAD, Nady, shure, among several others all
sell
> > quality studio mikes for around 30 to 60 bucks.
> > If you want a really high quality mike for vocal audio, the shure
beta-58 is
> > about the best on the market right now under $500.
> > It's around the same price as the Heil Gold line, in the $150 to $199
range.
> > The idea is to have as flat a response out of the microphone as
possible,
> > and then contour the response with a graphic Equalizer.
> > Some of the cheaper mikes will have bumps at 1K or 2K to increase
> > intelegability on a PA, but the better ones will be flat.
> > I use a shure sm 158 from time to time on the ts2000 straight in and get
> > good results.
> >
> > Look around for an old style desk lamp that has a double action boom on
it.
> > They often have a shelf clamp on one end, and you can modify the other
end
> > to hold a mike clip.
> > You should be able to locate a goose neck with a clamp on one end for
studio
> > control room or DJ use.
> > Sometimes you have to get a few different parts and build the thing to
suit
> > your needs.
> >
> > 73
> > Colin, V A6BKX
> > ----- Original Message ----- 
> > From: "John Miller" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Wednesday, April 02, 2008 5:09 PM
> > Subject: Microphone question
> >
> >
> >> Hi all, I'm sure someone in here has to be using a broadcast mic, or
heil
> >> gold line, mic, either with their ham radio station, or for music, or
> > maybe
> >> broadcast radio. I just picked one up, that MC-60 really got on my
nerves,
> > I
> >> could not get it like I wanted with out bypassing the base completely,
so
> >> W2IHY suggested a professional mic that's very inexpensive and sounds
> > great.
> >> Looks like it's a lot more expensive than it is too, I mean, I paid $30
> >> including shipping for the thing and the audio reports are incredible.
> >> Reviews on www.eham.net are as well. Anyway, I'm looking for a decent,
not
> >> too expensive boom mount. Something I can clamp to my desk and it will
put
> >> the mic right in front of me. I've looked and I'm not sure what's what
but
> >> this little desk stand I have really stinks and I'd like something that
I
> >> can bring in front of me a little closer when I sit back and relax in
my
> >> chair. Does anyone know of anything like that I might look in to? I'm
sure
> >> there is such a thing but I've never looked before and some things
sound
> >> close but I'm not sure and can't spend money to find out it's not even
> > close
> >> as it sounds. Thanks.
> >> John Miller N1UMJ
> >> AIM and yahoo messenger: N1UMJ Skype: n1umjjohn
> >> home page:
> >> http://home.comcast.net/~n1umj/wsb/html/view.cgi-home.html-.html
> >> myspace: http://www.myspace.com/n1umj
> >>
> >>
> >>
> >> -- 
> >> No virus found in this incoming message.
> >> Checked by AVG.
> >> Version: 7.5.519 / Virus Database: 269.22.4/1355 - Release Date:
4/1/2008
> > 5:37 PM
> >>
> >
> >
> > __________ NOD32 2996 (20080403) Information __________
> >
> > This message was checked by NOD32 antivirus system.
> > http://www.eset.com
> >
> >
> >
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.519 / Virus Database: 269.22.4/1355 - Release Date: 4/1/2008
5:37 PM
>
>

ATOM RSS1 RSS2