Hi;
That is a good start. At one time ten meters was used for I believe the
output frequency but that may be long gone. As for the rotator the standard
rotator will just change the horizontal direction that the beam is pointing.
How is the antenna adjusted vertically or isn't that necessary?
Richard
----- Original Message -----
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, May 29, 2008 1:36 PM
Subject: Re: satolite operation
well, most people who work satelites are using, at the minimum, a multi
element beam for both the UHF and VHF sides.
The way the amateur satelites work, is that the receivers on the satelite
will receive on one band, say UHF, and the transmitter will transmit on
another, say VHF.
You can buy dual band beams anywhere from 3 elements and up. These are
usually sold as satelite antennas. Cushcraft sells several different models
relatively inexpensively.
Typically, the satelites transmitters, and the band you have to receive on
your radio is in the 432 to 438MHZ range, either on FM or SSB or CW or one
of the digital modes.
The satelite receives, and where you have to set your transmitter is
usually in the 145 to 146MHZ range. Some satelites flip these around.
There are several good FM satelites, so you don't have to worry about
getting a VHF/UHF SSB capable rig if you don't have one...though it might be
a great reason to buy the ts2000 if you don't already have it.
The beam must be rotatable so that you can follow the satelites path across
your sky.
there are several programs that will help you determine when the satelite
will be in range for you, and how long it will last, and the angle it will
be crossing at. You can get this info from the amsat.org website:
HTTP://www.amsat.org
and click on path predictions and enter either your grid square or lat and
long position.
You can work satelites with a hand held, or vertical antenna, but your
maximum usable time is extremely limited due to the horizon and sheer
distance.
Also, vertical antennas tend to have a sharp angle of radiation and you need
a pretty low angle to work most satelites.
A directional beam antenna usually has a low, 25/28 degree radiation angle.
anyway, hope that answers your questions?
another note is that most of the satlite tracking programs also have the
capability to control certain roters and position your antenna acording to
the path of the satelite within range.
73
Colin, V A6BKX
----- Original Message -----
From: "Richard Fiorello" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, May 29, 2008 12:28 PM
Subject: satolite operation
> Hi everyone;
> Has anyone on the list done any satellite work? I'm wondering how much
> radio and antenna are needed? I believe at one time you needed a receive
> preamp at the antenna but I'm hoping that has changed. What frequencies
are
> most common and how much power is needed? Also what kind of antenna
systems
> have worked well? I have heard mention of a "egg beater" antenna but
never
> found out what the thing looked like.
> Richard
>
>
> --
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.24.3/1472 - Release Date: 5/29/2008
7:27 AM
>
>
|