Wow, it would seem that any "clicking" relay, wouldn't that it wear out the
relay more if you left it on because it had to turn on and / or off the
connection through the auto tuner over and over, shorten the life of it?
Unless it is a specially designed "keying" relay, etc. :) I don't know just
speculating, and haven't read more on this thread.
Super nice radio, and congratulations on having it.
----- Original Message -----
From: "T Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, December 25, 2007 12:09 PM
Subject: Re: TS480 update and some questions
So, Anthony, the clicking relays won't hurt anything? In other words,
I'm not going to damage the auto-tuner by leaving it on or in line like
that?
I don't recall having this concern with my IC746, but then again, that's a
different radio.
73 from Tom behler: KB8TYJ
----- Original Message -----
From: "Anthony Vece" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, December 25, 2007 12:57 PM
Subject: Re: TS480 update and some questions
> Hi Tom;
>
> I also had the same speaker problem with that radio.
>
> I always adjusted the receive eq setting to compensate for the volume
> drop.
>
> I think it's menu 19 or 20.
>
> Also, I always left the auto tuner in line except when I was using an
> external tuner.
>
> That's how you can tell if the tuner is on or off by the sound of the
> clicking relay.
>
> 73 De Anthony W2AJV
> [log in to unmask]
> ECHOLINK NODE NUMBER: 74389
>
> ----- Original Message -----
> From: "T Behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, December 25, 2007 12:28 PM
> Subject: Re: TS480 update and some questions
>
>
>> Howard and all:
>>
>> Well, I'm making progress again here, but will have to end soon because
>> of
>> going to some friends for Christmas dinner.
>>
>> I've now got my CW weight adjusted properly, and am getting the hang of
>> the
>> filter adjustments.
>>
>> Haven't tried any of the equalization stuff, or SSB yet.
>>
>> I tried using the headphone jack on the side of the control panel for a
>> Radio Shack external speaker that usually works quite well, and the
>> speaker
>> volume dropped sharply. (probably an impedance issue). Does anyone know
>> if
>> there's another jack for an external speaker on the main radio unit?
>>
>> Finally, I do have a question that I need an answer to so I don't risk
>> damaging anything:
>>
>> Once you've tuned an antenna with the internal automatic antenna tuner,
>> do
>> you leave the tuner on, or turn it off? When I leave it on, I can hear
>> the
>> tuner's relays clicking, which doesn't sound like it'd be the best thing
>> in
>> the world for the tuner. As long as I get the CW A after tuning, is it
>> best
>> to turn the auto-tuner off completely>?
>>
>> Thanks and 73 from Tom Behler: KB8TYJ
>>
>> ----- Original Message -----
>> From: "Howard Kaufman" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, December 25, 2007 9:32 AM
>> Subject: Re: TS480 update and some questions
>>
>>
>>> Others might like the info.
>>> 1. Use cw reverse when necessary to line up ssb and cw.
>>> 2. On the diamond shaped arrows, the right button pressed once on cw
>>> will
>>> give you the width. use the mhz step knob on the lower right to select
>>> desired width. You use the same controls to set the width for ssb and
>>> cw.
>>>
>>> ----- Original Message -----
>>> From: "T Behler" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Tuesday, December 25, 2007 7:34 AM
>>> Subject: TS480 update and some questions
>>>
>>>
>>>> Hi, folks.
>>> Menu 35 is cw weight, menu 18 is rx equalization, menu 19 is transmit
>>> equalization.
>>> Hope that helps! >
>>>> Well, shortly after midnight this morning, I made my first contact with
>>>> my
>>>> new TS480. It was an 80-meter CW contact in New Jersey.
>>>>
>>>> The guy said I had a 599 signal on my 80-meter dipole, which was an
>>>> honest
>>>> report.
>>>>
>>>> One real challenge I had at first was setting some of the menus. I
>>>> could
>>>> get into the menus fine, but had to get sighted assistance from the
>>>> XYL,
>>>> because I didn't know how to change menu settings with the
>>>> all-important
>>>> arrow keys, and where those arrow keys were.
>>>>
>>>> I am having some trouble adjusting the CW sending with the rig. It
>>>> seems
>>>> that, at 25 WPM, where I like to operate, the weighting of the CW is
>>>> off,
>>>> so
>>>> I'll have to go into the relevant menu, and mess with that.
>>>>
>>>> I could use some help with a few questions:
>>>>
>>>> 1. Can someone give me a quick tutorial on how to use the various RX
>>>> filters ? I am having trouble figuring out how to consistently use
>>>> them.
>>>> Also, I had a CW filter installed, and would like to figure out an easy
>>>> way
>>>> to toggle it on and off if possible.
>>>>
>>>> 2. How do I access the equalization settings for shaping your audio in
>>>> SSB?
>>>> I found the compressor, but I think there's more to it than just that.
>>>>
>>>> 3. I can't seem to find the jack or jacks for an external speaker, or
>>>> the
>>>> headphones. I assume they're somewhere on the main radio, not the
>>>> control
>>>> head unit?
>>>>
>>>> 4. I have noticed that, on 40 and 80 meters, the frequency change for
>>>> CW
>>>> signals is opposite of SSB signals on those bands. Is this normal? I
>>>> originally thought that I had the CW reverse on, but I now don't think
>>>> so.
>>>>
>>>> I may have more questions, but I think this is it for now.
>>>>
>>>> If anyone wants to e-mail me privately, rather than cluttering up the
>>>> list
>>>> here, please use:
>>>>
>>>> [log in to unmask]
>>>>
>>>> The XYL has been extremely patient through my TS480 adventures so far,
>>>> and
>>>> through my efforts to resolve my IC746 output power problem, so I'll be
>>>> off
>>>> list and off the air for at least part of the day to celebrate
>>>> Christmas
>>>> with her and some friends, but I'll get to any e-mails I can as time
>>>> allows.
>>>>
>>>> The TS480 is turning out to be a great rig, although it does have a bit
>>>> more
>>>> of a learning curve than I've had with other rigs. But then again, I
>>>> think
>>>> it's partly the new technology that's making it that way. I also think
>>>> it
>>>> will perfect for my HF motor home installation which, of course, is my
>>>> ultimate goal.
>>>>
>>>> 73 and Merry Christmas from Tom behler: KB8TYJ
>>>>
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.516 / Virus Database: 269.17.8/1195 - Release Date:
>>>> 12/24/2007 11:19 AM
>>>>
>>>>
>>>
>>>
>>
>
>
|