I found someone that has a link to a web site with the v7 codes in it, I'm
going to give that a shot. He also said that he didn't see the codes in the
v7 manual either.
----- Original Message -----
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, December 15, 2007 3:22 PM
Subject: Re: sky command codes in text format
> if the v71 manual doesn't have the info, the V7A manual will.
> obviously the commands are there in the v71's manual, so it must work, you
> just need them in a more accessible format...the question of weather it
> will
> work or not, is not at stake here.
>
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "Chris Schulte" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Saturday, December 15, 2007 9:54 AM
> Subject: Re: sky command codes in text format
>
>
>> That's what I'm looking for, the dtmf codes to remotely control the
>> radio.
>> I know a friend that has a v7 and he uses his hand held to control it
>> remotely using dtmf codes, I was hoping that someone on this list would
> know
>> how to do the same thing with the 71. I looked in the manual, and
>> there's
>> really not a lot on how to do that. Thnaks and 73,
>> Chris, w8cjs
>> ----- Original Message -----
>> From: "Colin McDonald" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, December 14, 2007 11:13 PM
>> Subject: Re: sky command codes in text format
>>
>>
>> >I don't think the v71 has a built in tnc.
>> > though i may be wrong.
>> > the d7a has a built in tnc and dual band tx and rx capabilities.
>> > the only other radio that kenwood makes that can be used with sky
> command
>> > and the ts2000 is the tm D700.
>> > However, if the v71 is anything like the v7a, or the d700 or the
>> > ts2000,
>> > they can all be controled on a very limited basis with dtmf codes.
>> > I haven't looked in a long time, and I haven't used the feature in a
> long
>> > time, but I know you can control certain functions remotely by using
>> > the
>> > dtmf codes for the ts2000 and the v7a...not sure about the v71.
>> > 73
>> > Colin, V A6BKX
>> > ----- Original Message -----
>> > From: "Chris Schulte" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Friday, December 14, 2007 9:04 PM
>> > Subject: Re: sky command codes in text format
>> >
>> >
>> >> So then I need a tnc for both the th7 and v71? For that matter, I
>> >> need
>> > one
>> >> or both rigs hooked to a computer? I just want to know how it's all
>> >> going
>> >> to work. If I have to get the th7, that's not a problem, heck, it's
>> >> actually cheapper.
>> >>
>> >> ----- Original Message -----
>> >> From: "Anthony Vece" <[log in to unmask]>
>> >> To: <[log in to unmask]>
>> >> Sent: Friday, December 14, 2007 10:49 PM
>> >> Subject: Re: sky command codes in text format
>> >>
>> >>
>> >> > Hi Chris;
>> >> >
>> >> > The F6A will not do what you want it to do.
>> >> >
>> >> > The Sky Command control codes are transmitted with a TNC.
>> >> >
>> >> > They are not transmitted with touchtones and or DTMF tones.
>> >> >
>> >> > The handheld that will work is the TH-D7A.
>> >> >
>> >> > The D7A has a built-in TNC.
>> >> >
>> >> > 73 De Anthony W2AJV
>> >> > [log in to unmask]
>> >> > ECHOLINK NODE NUMBER: 74389
>> >> >
>> >> > ----- Original Message -----
>> >> > From: "Chris Schulte" <[log in to unmask]>
>> >> > To: <[log in to unmask]>
>> >> > Sent: Friday, December 14, 2007 5:06 PM
>> >> > Subject: sky command codes in text format
>> >> >
>> >> >
>> >> >> Ok, I'm not sure if Kenwood calls it sky command, or sky commander,
>> >> >> and
>> > =
>> >> >> being as how I'm too lazy to look in my tmv--71 manual or my
>> >> >> ts-2000
> =
>> >> >> manual for the exact name of it, I figured if I made a mistake, I'd
> be
>> > =
>> >> >> forgiven. =20
>> >> >>
>> >> >> Anyway, does anyone have the control codes for sky command in a
>> >> >> text
> =
>> >> >> format that is readable? I was looking at it in my tmv-71 manual a
>> >> >> few
>> > =
>> >> >> days ago, and I can't for the life of me read or understand that
> table
>> > =
>> >> >> that is in there. =20
>> >> >>
>> >> >> I'm going to be purchasing the THF6A in late january, and want to
>> >> >> be
> =
>> >> >> able to use it to remotely control the 71a. Thanks for any help,
>> >> >> Chris, w8cjs
>> >> >>
>> >> >>
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> No virus found in this incoming message.
>> >> Checked by AVG Free Edition.
>> >> Version: 7.5.503 / Virus Database: 269.17.2/1184 - Release Date:
>> > 12/14/2007 11:29 AM
>> >>
>> >>
>> >
>>
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.503 / Virus Database: 269.17.2/1185 - Release Date:
> 12/15/2007 12:00 PM
>>
>>
>
|
