I know Lowell Miller uses it also.
You may want to check with him.
73 De Anthony W2AJV
[log in to unmask]
ECHOLINK NODE NUMBER: 74389
----- Original Message -----
From: "Chris Schulte" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, December 15, 2007 11:54 AM
Subject: Re: sky command codes in text format
> That's what I'm looking for, the dtmf codes to remotely control the radio.
> I know a friend that has a v7 and he uses his hand held to control it
> remotely using dtmf codes, I was hoping that someone on this list would
> know
> how to do the same thing with the 71. I looked in the manual, and there's
> really not a lot on how to do that. Thnaks and 73,
> Chris, w8cjs
> ----- Original Message -----
> From: "Colin McDonald" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, December 14, 2007 11:13 PM
> Subject: Re: sky command codes in text format
>
>
>>I don't think the v71 has a built in tnc.
>> though i may be wrong.
>> the d7a has a built in tnc and dual band tx and rx capabilities.
>> the only other radio that kenwood makes that can be used with sky command
>> and the ts2000 is the tm D700.
>> However, if the v71 is anything like the v7a, or the d700 or the ts2000,
>> they can all be controled on a very limited basis with dtmf codes.
>> I haven't looked in a long time, and I haven't used the feature in a long
>> time, but I know you can control certain functions remotely by using the
>> dtmf codes for the ts2000 and the v7a...not sure about the v71.
>> 73
>> Colin, V A6BKX
>> ----- Original Message -----
>> From: "Chris Schulte" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, December 14, 2007 9:04 PM
>> Subject: Re: sky command codes in text format
>>
>>
>>> So then I need a tnc for both the th7 and v71? For that matter, I need
>> one
>>> or both rigs hooked to a computer? I just want to know how it's all
>>> going
>>> to work. If I have to get the th7, that's not a problem, heck, it's
>>> actually cheapper.
>>>
>>> ----- Original Message -----
>>> From: "Anthony Vece" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Friday, December 14, 2007 10:49 PM
>>> Subject: Re: sky command codes in text format
>>>
>>>
>>> > Hi Chris;
>>> >
>>> > The F6A will not do what you want it to do.
>>> >
>>> > The Sky Command control codes are transmitted with a TNC.
>>> >
>>> > They are not transmitted with touchtones and or DTMF tones.
>>> >
>>> > The handheld that will work is the TH-D7A.
>>> >
>>> > The D7A has a built-in TNC.
>>> >
>>> > 73 De Anthony W2AJV
>>> > [log in to unmask]
>>> > ECHOLINK NODE NUMBER: 74389
>>> >
>>> > ----- Original Message -----
>>> > From: "Chris Schulte" <[log in to unmask]>
>>> > To: <[log in to unmask]>
>>> > Sent: Friday, December 14, 2007 5:06 PM
>>> > Subject: sky command codes in text format
>>> >
>>> >
>>> >> Ok, I'm not sure if Kenwood calls it sky command, or sky commander,
>>> >> and
>> =
>>> >> being as how I'm too lazy to look in my tmv--71 manual or my ts-2000
>>> >> =
>>> >> manual for the exact name of it, I figured if I made a mistake, I'd
>>> >> be
>> =
>>> >> forgiven. =20
>>> >>
>>> >> Anyway, does anyone have the control codes for sky command in a text
>>> >> =
>>> >> format that is readable? I was looking at it in my tmv-71 manual a
>>> >> few
>> =
>>> >> days ago, and I can't for the life of me read or understand that
>>> >> table
>> =
>>> >> that is in there. =20
>>> >>
>>> >> I'm going to be purchasing the THF6A in late january, and want to be
>>> >> =
>>> >> able to use it to remotely control the 71a. Thanks for any help,
>>> >> Chris, w8cjs
>>> >>
>>> >>
>>> >
>>>
>>>
>>>
>>> --
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.5.503 / Virus Database: 269.17.2/1184 - Release Date:
>> 12/14/2007 11:29 AM
>>>
>>>
>>
>
>
|
