Hi Chris;

The only thing I know is that you need to use the TH-D7A as your handheld.

The other radio needs to have a built-in TNC like the TS-2000 or the 
TM-D7000 or the TM-V710.

Hope this helps.

73 De Anthony W2AJV
[log in to unmask]
ECHOLINK NODE NUMBER: 74389

----- Original Message ----- 
From: "Chris Schulte" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, December 14, 2007 11:04 PM
Subject: Re: sky command codes in text format


> So then I need a tnc for both the th7 and v71?  For that matter, I need 
> one
> or both rigs hooked to a computer?  I just want to know how it's all going
> to work.  If I have to get the th7, that's not a problem, heck, it's
> actually cheapper.
>
> ----- Original Message ----- 
> From: "Anthony Vece" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, December 14, 2007 10:49 PM
> Subject: Re: sky command codes in text format
>
>
>> Hi Chris;
>>
>> The F6A will not do what you want it to do.
>>
>> The Sky Command control codes are transmitted with a TNC.
>>
>> They are not transmitted with touchtones and or DTMF tones.
>>
>> The handheld that will work is the TH-D7A.
>>
>> The D7A has a built-in TNC.
>>
>> 73 De Anthony W2AJV
>> [log in to unmask]
>> ECHOLINK NODE NUMBER: 74389
>>
>> ----- Original Message ----- 
>> From: "Chris Schulte" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Friday, December 14, 2007 5:06 PM
>> Subject: sky command codes in text format
>>
>>
>>> Ok, I'm not sure if Kenwood calls it sky command, or sky commander, and 
>>> =
>>> being as how I'm too lazy to look in my tmv--71 manual or my ts-2000 =
>>> manual for the exact name of it, I figured if I made a mistake, I'd be =
>>> forgiven. =20
>>>
>>> Anyway, does anyone have the control codes for sky command in a text =
>>> format that is readable?  I was looking at it in my tmv-71 manual a few 
>>> =
>>> days ago, and I can't for the life of me read or understand that table =
>>> that is in there. =20
>>>
>>> I'm going to be purchasing the THF6A in late january, and want to be =
>>> able to use it to remotely control the 71a.  Thanks for any help,
>>> Chris, w8cjs
>>>
>>>
>>
>
>