John,

I have one, and like it very much.  Mine plays best on 40 and 75.  On those 
bands, I usually get the same signal report I give out.  I haven't tried the 
antenna on 160, and it doesn't seem to work quite as well on 20 and above. 
Then again, it might work better if I could raise the center up to 50 feet. 
Still, it doesn't do badly, and it took about an hour to put up.  It's just 
strung between two trees about 20 feet off the ground with no support in the 
center.  That's not quite the way they tell you to run it, so I can't 
complain about its performance.

Steve

----- Original Message ----- 
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, October 31, 2007 10:51
Subject: Re: Band duldroms.... Antennas!


> The cobra ultralight seems to be the new trend in good multi band 
> antennas,
> I hear it's better than the G5RV, I know it's a lot lighter. I have one in
> the closet and am looking forward to trying it. It's kind of expensive to 
> me
> and looks very easy to build from the little bit I looked at mine, but it
> supposedly is good from 10 to 160 and looking at reviews and what people
> tell me about it who have it, it's a good antenna, made right in NH and 
> the
> tech support is incredible, you email the guy with questions and you get a
> response in a few hours with the answer and if you can't do what you want 
> to
> do and asked about he'll come up with other ideas to try to help. Like I
> say, the antenna doesn't look like much, but everyone I know who uses one
> swears by it and those that have compared it with a G5RV say it beats it
> noticeably everywhere.
> ----- Original Message ----- 
> From: "Brett Winches" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, October 31, 2007 10:21 AM
> Subject: Band duldroms.... Antennas!
>
>
>>I hope to get something up   but finding the time is the real problem.
>> Planning some in mid November however. =20
>>
>> Any good ideas for low height 160  antennas?
>>
>>
>>
>>
>> ###
>> BRETT WINCHESTER
>> [log in to unmask]
>> 208-639-8386
>> ###
>>
>>
>> -----Original Message-----
>> From: For blind ham radio operators
>> [mailto:[log in to unmask]] On Behalf Of Anthony Vece
>> Sent: Wednesday, October 31, 2007 7:46 AM
>> To: [log in to unmask]
>> Subject: Re: tmv71a
>>
>> I know.
>>
>>
>> ----- Original Message -----
>> From: "Brett Winches" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Wednesday, October 31, 2007 9:09 AM
>> Subject: Re: tmv71a
>>
>>
>>> Ah but now is the time to prepare for when hf returns.=3D20
>>>=20
>>>=20
>>> ###
>>> BRETT WINCHESTER
>>> [log in to unmask]
>>> 208-639-8386
>>> ###
>>>=20
>>>=20
>>> -----Original Message-----
>>> From: For blind ham radio operators
>>> [mailto:[log in to unmask]] On Behalf Of Anthony Vece
>>> Sent: Wednesday, October 31, 2007 4:02 AM
>>> To: [log in to unmask]
>>> Subject: Re: tmv71a
>>>=20
>>> Hi Chris;
>>>=20
>>> I may buy another one for my car.
>>>=20
>>> When I my I'll have antenna restrictions and I'm not going to go crazy
>>> with hf.
>>>=20
>>> Not the way the bands are now.
>>>=20
>>> 73 De Anthony W2AJV
>>> [log in to unmask]
>>> ECHOLINK NODE NUMBER: 74389
>>>=20
>>> ----- Original Message -----
>>> From: "Chris Schulte" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Tuesday, October 30, 2007 9:06 PM
>>> Subject: Re: tmv71a
>>>=20
>>>=20
>>>> All you have to do is change the settings in echo link from computer
>>> user=3D20
>>>> to
>>>> sysop, then hook the radio up to your computer and turn it on and
>> away
>>> you
>>>> go.  Once I get the cables I'll be doing this with my v71a, but I
>>> enjoy
>>>> using the radio so much maybe I should buy another one?  *grin*
>> That's
>>> one
>>>> of the nice things about being single, you don't have to explain
>>> things=3D20
>>>> like
>>>> that to a cignificant other.  *grin*
>>>> 73,
>>>> Chris, w8cjs
>>>> web site,
>>>> www.w8cjs.com
>>>>
>>>> ----- Original Message -----=3D20
>>>> From: "Butch Bussen" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Tuesday, October 30, 2007 8:07 PM
>>>> Subject: Re: tmv71a
>>>>
>>>>
>>>>>I can't tell you much about echo link.  I have an i r l p node here
>> on
>>> my
>>>>> own repeater.  I'm sure you have to register with echolink, sending
>>> them
>>>>> your call and  you're assigned a number.  Others can probably tell
>>> you
>>>>> more.
>>>>> 73s
>>>>> Butch Bussen
>>>>> wa0vjr
>>>>
>>>
>
>
>