In the View menu of the cloning software there's an option labeled "common
settings".  This allows you to set all the menu settings.  There are three
tabs within the common settings, the CW readout is under the expanded
settings #2.

73, Ken -n5SWR


-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of John Miller
Sent: Thursday, April 12, 2007 9:43 AM
To: [log in to unmask]
Subject: Re: ict90


Every time you program the radio with the software, when you're done you
have to reenable the CW read out.
----- Original Message -----
From: "Richard Fiorello" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, April 12, 2007 10:20 AM
Subject: Re: ict90


> Hi John and list;
> I eventually figured it out.  I had the correct offset set but I thought
> that the offset direction would be automatic based on the frequency.  Once

> I
> manually checked plus or minus things worked out.  I hadn't needed to use
> that software in quite some time but although there were some adventures
> it
> is certainly easier than doing each frequency manually.
> Somehow I managed to disable the cw read out and tv channels.  After some
> investigation both are now working but no idea how that happened.
> 73
> Richard
>
>
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, April 11, 2007 5:18 PM
> Subject: Re: ict90
>
>
> Do you have the right offset? not just plus or minus, but the right step
> site for the offset?
> ----- Original Message -----
> From: "Richard Fiorello" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, April 11, 2007 6:59 PM
> Subject: ict90
>
>
>> Hi;
>> The good news is that for unknown reasons the software is now letting me
>> put
>> in and copy all the frequencies I want.  The bad news is that I don't
>> seem
>> to be hearing anything or hitting any repeaters.  I have put in the "pl"
>> tone and checked the tone box.  The attenuator is not checked and it is
>> on
>> high power.  I obviously changed some other setting that is causing a
>> real
>> problem. Under view I was looking under "common setting" and I suspect
>> that
>> may be a place to avoid.
>> Any ideas will be happily received.
>> Richard

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/759 - Release Date: 4/12/2007
7:58 PM


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.446 / Virus Database: 269.4.0/759 - Release Date: 4/12/2007
7:58 PM