Maybe that's the same as the 480 then.  that's a shame, they should keep 
making them the same.
----- Original Message ----- 
From: "Anthony Vece" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, March 11, 2007 7:23 PM
Subject: Re: 480 cable


> The ICOM 7000 cord is different.
>
> I won't even work on the 706.
>
>
>  ----- Original Message -----=20
>  From: John Miller=20
>  To: [log in to unmask]
>  Sent: Saturday, March 10, 2007 9:34 PM
>  Subject: Re: [BLIND-HAMS] 480 cable
>
>
>  I've never seen an icom that didn't take the same one as the kenwoods, =
> not=20
>  the 480 though, and alinco makes one too like that. Unless Icom has a =
> radio=20
>  none of us know about, that can't be an icom cable, unless maybe the =
> 7000=20
>  uses a different plug? I didn't think so, but I know for fact all the =
> other=20
>  current models use the same 6 pin connector that Kenwood uses =
> excluding the=20
>  480 and the alinco dx70 has.
>  ----- Original Message -----=20
>  From: "Butch Bussen" <[log in to unmask]>
>  To: <[log in to unmask]>
>  Sent: Saturday, March 10, 2007 8:31 PM
>  Subject: Re: 480 cable
>
>
>  > This is getting confusing.  I don't know what cords icom uses.  I =
> can tell
>  > you positively, I own both radios, and I've owned about ten kenwoods =
> over
>  > the years.  All of their radios until the 48 used the same larger
>  > connector.  The 480 uses a smaller one.  Why is this so confusing.  =
> If you
>  > bought a cable from icom for the 480, let us know what icom it was =
> for.
>  > Any icoms I've seen, use the same older or larger cord, same as =
> Kenwood
>  > used.
>  > Again, I repeat, the 480 is a different cord!!!!!!
>  > 73s
>  > Butch Bussen
>  > wa0vjr