use the control tab command to switch to the menus window.
Also, the ctcss fields are set up one for a transmit tone, and one for
receive tone.
You can tell the difference by the terminology. The transmit tone will say,
simply, tone, and the receive tone will say ctcss, dcs, excetra.
There has to be two fields so you can pick different frequencies for each.
There should be two fields for the correct HZ frequency for tx and rx tones
as well.
Just arrow to off, or none if you don't want to use them.
73
Colin, V A6BKX
----- Original Message -----
From: "T Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, December 25, 2006 8:41 PM
Subject: Re: Kenwood TMV7A question
> Colin and all:
>
> I've started playing with the Kenwood TMV7A programming software a bit,
and
> have several questions:
>
> 1. When hitting enter on a memory number, and then tabbing through the
> various options, I find two CTCSS tone fields. I only want a PL tone for
> transmitting. Which field do I use, and do I just ignore the other one?
>
> 2. Where do you get to the menus in the software?
>
> 3. Once you've done everything you want to do, how do you save your work,
> and then, how do you write it to the radio?
>
> Forgive me: I'm a newby at the programming software idea, but now that I
> see how easy it is, I wish I had done it a long time ago.
>
> Help with the above questions should get me in a position where I'm good
to
> go.
>
> 73 from Tom Behler: KB8TYJ
>
>
> ----- Original Message -----
> From: "Colin McDonald" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, December 25, 2006 12:32 PM
> Subject: Re: Kenwood TMV7A question
>
>
> > yes, the software is extremely jaws friendly.
> > For the memory locations, a listing of all availible channels, by number
> > pops up, and you simply press enter on the channel number that you wish
to
> > program, and by using the tab key, you can cycle through the various
> > options, such as frequency, offset, tone, lockout excetra.
> > The menu tab works similarly with a listing of all menu items and then
by
> > using tab you can set the state of each menu.
> > Makes things a breeze thats for sure.
> > You can also save a file of all your settings and then easily load
those
> > settings on to which ever radio you want.
> > You can get the software for free off of kenwoods website.
> > 73
> > Colin, V A6BKX
> > ----- Original Message -----
> > From: "T Behler" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Monday, December 25, 2006 10:09 AM
> > Subject: Re: Kenwood TMV7A question
> >
> >
> > > Butch:
> > >
> > > My XYL, being the real ham that she is, got the guy who sold us the
> TMV7A
> > to
> > > include the computer cable in with the deal, so I made out really
well.
> > >
> > > I now have 3 TMV7A's--One for the car, one for the house, and one that
> > will
> > > be used exclusively in our camper.
> > >
> > > May seem like a bit of overkill, but can you ever have enough good
> radios?
> > >
> > > On another note: Is the programming software Jaws friendly?
> > >
> > > I have not used it up to this point, but now want to get all of my
> TMV7A's
> > > programmed identically.
> > >
> > > 73 from Tom Behler: KB8TYJ
> > >
> > > ----- Original Message -----
> > > From: "Butch Bussen" <[log in to unmask]>
> > > To: <[log in to unmask]>
> > > Sent: Monday, December 25, 2006 4:23 AM
> > > Subject: Re: Kenwood TMV7A question
> > >
> > >
> > > > Yes, it uses the vs 3 and it cost $39.95. It sure is a tiny little
> > thing.
> > > > I had to get sighted help to put it in. Guess my ft fingers are too
> > > > clutsy. I also just picked up a used one and bought the chip at a e
s
> > > > here in town last Tuesday. I have the computer cable for mine, so
it
> > > > makes programming and or cloning a snap.
> > > > 73s
> > > > Butch Bussen
> > > > wa0vjr
> > > >
> > >
> > >
> > > --
> > > No virus found in this incoming message.
> > > Checked by AVG Free Edition.
> > > Version: 7.5.432 / Virus Database: 268.15.27/602 - Release Date:
> > 12/25/2006 10:19 AM
> > >
> > >
> >
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.15.27/602 - Release Date:
12/25/2006 10:19 AM
>
>
|