I don't have the email addy of the person wanting the manual. But, I scanned it
with Open Book and it seemed to come out quite well. I only read the first five
pages, but they scanned and recognized fine.
I also have an IC-751A so would be glad to help.
Just send me a message off-list to my call sign at sbcglobal.net and I'll send
it to you as an attachment.
Here's an excerpt to show you the quality.
SECTION 1 FEATURES
COMPLETE HF RADIO
•ALL BAND, ALL MODE ALL SOLID-STATE
The IC-751A covers all Amateur HF frequencies from 1.8MHz to
30MHz, including the three new bands of 10MHz, 18MHz and
24MHz. It also offers SSB, CW, AM, FM and RTTY operating modes as standard
features. All circuits in the IC-751A, including the driver and final power
stages, are completely solid-state producing a final output power of 100 watts.
• GENERAL COVERAGE RECEIVER
• FULL BREAK-IN FUNCTION
The IC-751A features general coverage receive capability with a tuning range
from 100kHz to 30MHz. This wide range is accomplished by means of up-conversion
using a high side IF and a CPU control system.
For CW operators, both semi break-in and full break-in are provided for smooth,
fast and natural CW conversations.
OUTSTANDING RECEIVER PERFORMANCE
• ICOM'S DFM SYSTEM The ICOM DFM (Direct Feed Mixer) feeds the incoming
signals
directly into a high level first mixer developed by ICOM. This advanced system
produces a higher spurious response rejection ratio, a higher receiver
sensitivity and a wider dynamic range.
• 105dB DYNAMIC RANGE
• PREAMP AND ATTENUATOR INCLUDED
NEWLY DEVELOPED CPU
•VARIOUS SCANNING FUNCTIONS
•32 MEMORIES
OPTIONS AVAILABLE
• IC-PS30
• IC-2KL
The IC-751A has a 105dB dynamic range. Even with the PREAMP switched ON, the
dynamic range is approximately 100dB.
Both a 10dB preamplifier PLUS a 20dB attenuator are installed as standard
equipment. The preamplifier increases receiver sensitivity while the attenuator
provides added protection from intermodulation problems.
Memory Scan allows monitoring of all memory channels or only those storing a
particular mode. Programmed Scan provides scanning between any two programmed
frequencies. Mode Scan automatically monitors only memories containing
frequencies with a similar mode. In all cases, the Auto-stop function halts the
scan when a signal is received and the Resume function restarts the scan when
the frequency is clear.
Thirty-two programmable memories are provided to store mode and frequency, and
the CPU is backed up by an internal lithium battery to maintain the memories for
up to ten years. Scanning of frequencies or memories is possible from either the
transceiver or the HM-36 scanning microphone.
The IC-PS30 external AC power supply was developed especially for ICOM base
radios and matches the style and size of the IC-751 A. This power supply uses a
recently designed switching regulator, resulting in light weight and high
efficiency.
The IC-2KL is a completely solid-state, HF broadband linear amplifier with 500
watts output to give your signal the extra boost needed for solid contacts when
propagation is poor.
-1 -
Don't worry about what people think; they don't do it very often.
Steve, K8SP
|