Anthony,
In runs that short, RG58 is fine. If she's using a mag mount, trying to splice
onto the coax is more bother than it's worth. If she needs added length, a
barrel connector would do the trick. But, for a run of 12-15 feet, RG-58 is
perfectly acceptable, as the loss would be around only a DB at 440MHz.
For example, Beldon 8240 RG58u has an attenuation of about 4.5DB at 100MHZ and
10.5DB at 400MHz per 100 feet. If she has a fifteen foot ron, then she'd only
be losing 1.5DB, which is not that much.
Steve, K8SP
----- Original Message -----
From: "Anthony Vece" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, January 21, 2007 12:20 PM
Subject: Re: the antenna
My opinion, for what it's worth, is that I think you should cut off the =
original coax and put a solid piece of coax.
The coax should be in 9 foot increments.
RG58 is lossy enough and, if you add an extra piece with a barrel =
connecter and PL259 connecters, this may cause more of a loss and, =
possibly a mis-match.
But, that is just my opinion.
Hope this helps.
73 De Anthony W2AJV
[log in to unmask]
ECHOLINK NODE NUMBER: 74389
----- Original Message -----=20
From: Brett Winches=20
To: [log in to unmask]
Sent: Friday, January 19, 2007 7:27 PM
Subject: Re: [BLIND-HAMS] the antenna
The short coax may be a problem. Most of the dual benders are =
designed
with something like 17 feet of cable which helps in matching the
impedance. Try getting at least 10 feet in addition to the current =
feed
line and see what happens. Good luck. =20
=20
-----
BRETT WINCHESTER
[log in to unmask]
208-639-8386
###
=20
=20
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]] On Behalf Of Christy Schulte
Sent: Thursday, January 18, 2007 6:20 PM
To: [log in to unmask]
Subject: the antenna
I don't even remember the model, it's a dual band, brand new magmount =
I
got from Ebay. The cable running from it isn't all that long, so =
moving
it isn't really much of an option. right now it's sitting on top of a
metal filing cabinet, which is on top of a small dining room table, so
the bottom of the antenna is perhaps four and a half feet off the
ground. It's also directly by a window, not sure if that helps or not
but figured it can't hurt anyway.
I have neither the tools nor the knowledge to extend the cabling on =
it,
or I'd probably find some kind of way to get it even higher, and out =
of
easy cat reach. Unfortunately I don't have the cash to drop on the
talking meters, though that's a future plan for sure. Anyway, for now
i'll just stay off 440, my next project, probably even before getting =
an
HF rig, is getting an accessible HT. Actually two, since I'm hoping my
roommate will get her license soon.
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]]On Behalf Of Louis Kim Kline
Sent: Thursday, January 18, 2007 5:52 PM
To: [log in to unmask]
Subject: Re: Handihams, was: RE: exam
Hi.
That's why I asked what antenna she is running--it doesn't square with
my experience either, suggesting that maybe she is using a design that
is a poor radiator on 440.
73, de Lou K2LKK
--
I am using the free version of SPAMfighter for private users.
It has removed 3027 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com
--
Internal Virus Database is out-of-date.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.10.1/390 - Release Date:
7/17/2006
|