Hi John,
You may wish to check your mail settings. For some reason, your messages
are being duplicated and there are usually about three of the same message
when you send it. Not sure what might be happening there.
On the adapter question, when you install software from a CD which is what
usually comes with the ones I've seen, you will need to assign a serial port
number to the virtual serial port that is created. Just make sure the com
port numbers in ham radio deluxe include that number before assigning it.
Where your computer has no serial ports, this may not even be an issue.
Once you get the virtual serial port set up, then make sure HRD points to it
and make sure that the communication parameters in HRD match those of your
radio. Things should go well after that. I've run HRD with both a Kenwood
TS-480 and my Icom IC-746 Pro with good results in either case.
Good luck and please let us know your progress. Very 73 for now.
Kevin :)
Amateur Radio: K7RX
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of john vernaleken
Sent: Friday, January 12, 2007 19:41
To: [log in to unmask]
Subject: Re: Ham Radio Delux PC Question
When you say Serial ports must match -- my PC does not habe any Serial
ports. It seems no Serial ports is the new way.
Thanks
John KC2QJB
----- Original Message -----
From: "Kevin Nathan" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, January 12, 2007 10:18 PM
Subject: Re: Ham Radio Delux PC Question
>I would try somewhere like Comp USA or Best Buy. You will need also to
>make
> sure your serial port choices match.
>
> Good luck and very 73.
>
>
> Kevin :)
> Amateur Radio: K7RX
>
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of john vernaleken
> Sent: Friday, January 12, 2007 17:11
> To: [log in to unmask]
> Subject: Re: Ham Radio Delux PC Question
>
> I tried a Radio Shack adapter -- no luck does not find radio * I think ).
> One of the problems is cable came with software on floppy, no floppy on
> PC.
>
> Anyone have a suggestion where to get cable other than Radio Shack?
> Second
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, January 11, 2007 11:03 PM
> Subject: Re: Ham Radio Delux PC Question
>
>
>> those adapters are hit or miss, you got a good deal on that one.
>> ----- Original Message -----
>> From: "Colin McDonald" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Thursday, January 11, 2007 10:53 PM
>> Subject: Re: Ham Radio Delux PC Question
>>
>>
>>> seems to work well enough with the ts2000 and a $1.99 USB to serial
>>> adapter
>>> off ebay.
>>> However, i wasn't able to get the memory control program for the 2000 to
>>> work with that same adapter.
>>> 73
>>> Colin, CF6BKX
>>> ----- Original Message -----
>>> From: "John Miller" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Thursday, January 11, 2007 8:48 PM
>>> Subject: Re: Ham Radio Delux PC Question
>>>
>>>
>>>> you can try, I haven't had any luck with that yet. I know the Kenwood
>>> radios
>>>> need the CTS/RTS and most USB adapters don't support that. Some do, but
>>>> probably only the expensive ones.
>>>> ----- Original Message -----
>>>> From: "John Vernaleken" <[log in to unmask]>
>>>> To: <[log in to unmask]>
>>>> Sent: Thursday, January 11, 2007 10:24 PM
>>>> Subject: Ham Radio Delux PC Question
>>>>
>>>>
>>>> > On HRD Web Site it mentioned connecting the Serial port. Can I use
>>>> > an=20
>>>> > adapter to connect to a USB?
>>>> >
>>>> > Thanks
>>>> > =20
>>>> > John KC2QJB
>>>> >
>>>>
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.5.432 / Virus Database: 268.16.9/622 - Release Date:
>>>> 1/10/2007
>>> 2:52 PM
>>>>
>>>>
>>>
>>
>
|
