Hi John and list;
I eventually figured it out. I had the correct offset set but I thought
that the offset direction would be automatic based on the frequency. Once I
manually checked plus or minus things worked out. I hadn't needed to use
that software in quite some time but although there were some adventures it
is certainly easier than doing each frequency manually.
Somehow I managed to disable the cw read out and tv channels. After some
investigation both are now working but no idea how that happened.
73
Richard
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, April 11, 2007 5:18 PM
Subject: Re: ict90
Do you have the right offset? not just plus or minus, but the right step
site for the offset?
----- Original Message -----
From: "Richard Fiorello" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, April 11, 2007 6:59 PM
Subject: ict90
> Hi;
> The good news is that for unknown reasons the software is now letting me
> put
> in and copy all the frequencies I want. The bad news is that I don't seem
> to be hearing anything or hitting any repeaters. I have put in the "pl"
> tone and checked the tone box. The attenuator is not checked and it is on
> high power. I obviously changed some other setting that is causing a real
> problem. Under view I was looking under "common setting" and I suspect
> that
> may be a place to avoid.
> Any ideas will be happily received.
> Richard