That's what I did and it works just fine.
If I need to know my frequency I hit my enter key twice.
Thanks Again Steve
73 De Anthony W2AJV
[log in to unmask]
ECHOLINK NODE NUMBER: 74389
----- Original Message -----
From: "Steve" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, December 26, 2006 7:40 PM
Subject: Re: [BLIND-HAMS] TS-480SAT MENU WON'T GO ABOVE 60!!!
> So? If you want an s-meter reading, set menu 48 to 62.
>
> ----- Original Message -----
> From: "Anthony Vece" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, December 26, 2006 6:15 PM
> Subject: Re: TS-480SAT MENU WON'T GO ABOVE 60!!!
>
>
> Steve;
>
> My mic only has up/down buttons.
>
>
> ----- Original Message -----
> From: "Steve" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, December 26, 2006 4:52 PM
> Subject: Re: [BLIND-HAMS] TS-480SAT MENU WON'T GO ABOVE 60!!!
>
>
>> Anthony,
>>
>> Don't know where you got that idea. Menu 60 is the last one on the 480.
>> You
>> might be thinking of the functions for programming the PF keys. Menu 48:
>> program PF key on control panel. Menu 49-52 programs mike PF keys 1-4
>> respectiviely.
>>
>>
>> Here is the function table for the PF keys:
>> 00-60 correspond with the Menu Items.
>> 61: voice #1 reads frequency.
>> Voice 62 S-Meter Reading
>> 63: RX Monitor to force squelch open.
>>
>> 64: RX DSP Disable: receives using widest DSP setting.
>>
>> 65: Main Encoder lock
>> 66: Send Key, makes your PF a send key since the 480 doesn't have a
>> dedicated
>> one.
>> 67: TX Tuning: regardless of mode, transmit a carrier at a fixed power
>> level.
>> 68: LSB/USB Toggle
>> 69: CW/FSK Toggle
>> 70: FM/AM Toggle
>> 71: TF-Set
>> 72: Q MR
>> 73: Q MI
>> 74: SPLIT
>> 75: A/B
>> 76: M/V
>> 77: A=B
>> 78: Scan
>> 79L: M > V
>> 80: M.IN
>> 81: CW Tune
>>
>> 82-84: Channel 1-3
>> 85: Fine
>> 86: Clr
>> 87: MTR
>> 88: MHz
>> 89: Ant 1/2
>> 90: NB
>> 91: NR
>> 92: BC
>> 93: DNL
>> 99: Off, no function.
>>
>> For the VGS-1: menu 15 sets volume, Menu 16 sets speed.
>>
>> hth,
>> Steve, K8SP
>> ----- Original Message -----
>> From: "Anthony Vece" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, December 26, 2006 2:57 PM
>> Subject: TS-480SAT MENU WON'T GO ABOVE 60!!!
>>
>>
>> Hi Everyone;
>>
>> I just purchased a KENWOOD TS-480SAT.
>>
>> However, I can't get the menu numbers to go above 60.
>>
>> And, above 60 is where all the voice settings are.
>>
|