I don't know.
----- Original Message -----
From: "Anthony Vece" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, December 17, 2006 9:28 AM
Subject: Re: RS PRO-96 scanner was RE: New to the list.
> So then the PRO 97 is a later model?
>
>
> ----- Original Message -----=20
> From: Russ Kiehne=20
> To: [log in to unmask]
> Sent: Sunday, December 17, 2006 11:36 AM
> Subject: Re: [BLIND-HAMS] RS PRO-96 scanner was RE: New to the list.
>
>
> The pro-97 is a triple trunk tracker.
> The pro-96 does digital and trunk tracking but doesn't track ltr =
> systems.
> ----- Original Message -----=20
> From: "Anthony Vece" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, December 17, 2006 8:15 AM
> Subject: Re: RS PRO-96 scanner was RE: New to the list.
>
>
> > Hi Russ;
> >=20
> > What is the difference between the PRO 96 and the PRO 97?
> >=20
> > 73 De Anthony W2AJV
> > [log in to unmask]
> > ECHOLINK NODE NUMBER: 74389
> >=20
> > ----- Original Message -----=3D20
> > From: Russ Kiehne=3D20
> > To: [log in to unmask]
> > Sent: Sunday, December 17, 2006 10:36 AM
> > Subject: Re: [BLIND-HAMS] RS PRO-96 scanner was RE: New to the =
> list.
> >=20
> >=20
> > I was thinking about buying a pro-96. The reason I didn't, in my =
> =3D
> > area, only=3D20
> > one service is using digital. That was too much money to spend for =
> =3D
> > one=3D20
> > service. I ended up buying a pro-97. I can use win97 to see what =
> =3D
> > banks are=3D20
> > turned on or off. I just download from the scanner and go through =
> the =3D
> > bank=3D20
> > check boxes. One of the hams in my area emailed me the p97 file =
> for =3D
> > this=3D20
> > area. I can use the number keys on the pro-97 to turn on and off =
> =3D
> > banks I=3D20
> > want to hear.
> > ----- Original Message -----=3D20
> > From: "Kenneth Lee" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Sunday, December 17, 2006 4:28 AM
> > Subject: RS PRO-96 scanner was RE: New to the list.
> >=20
> >=20
> > > The Pro-96 is easy enough to operate once you get it programmed =
> via =3D
> > the
> > > computer. There are two operations that I have problems with, =
> =3D
> > there's no
> > > way to know which banks are on/off and I have not been able to =
> =3D
> > figure out
> > > how to manually jump to a talk-group.
> > >
> > > The problem with knowing which banks are on/off has been a =
> problem =3D
> > with
> > > every scanner I've ever used. It would be great to have a =
> function =3D
> > to=3D20
> > > turn
> > > on all the banks at once and then you could turn off the ones you =
> =3D
> > don't
> > > want. Or maybe, let's say you want to listen to only bank 1, =
> then =3D
> > by
> > > pressing "1" for three seconds, while in scan mode, would turn =
> off =3D
> > all the
> > > other banks except bank 1. There is a work around for the PRO-96 =
> =3D
> > though=3D20
> > > by
> > > using the virtual memory you can program one of the vm's with all =
> =3D
> > the=3D20
> > > banks
> > > off except for one. Then when you want to start from a new =3D
> > reference=3D20
> > > point
> > > just re-load the vm.
> > >
> > > I have never figured out the problem of jumping directly to a =3D
> > talk-group.
> > > Several people have told me how, but it doesn't work for me. I =
> =3D
> > think this
> > > problem could be overcome if I ever find a experienced Pro-96 =
> user =3D
> > who can
> > > look over my shoulder while I go through the motions.
> > >
> > > 73, Ken -N5SWR
> > >
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: For blind ham radio operators =3D
> > [mailto:[log in to unmask]]
> > > On Behalf Of Russ Kiehne
> > > Sent: Saturday, December 16, 2006 8:55 PM
> > > To: [log in to unmask]
> > > Subject: Re: New to the list.
> > >
> > >
> > > How easy is the scanner itself to use?
> > >
> >
>
|
