Hi David.
The software is the MCP2000 software which is the memory control package
that is a free download from Kenwood. It can be used to both program the
memories and to set the menus, and with it and a good screen reader such as
JAWS or Window-Eyes, the radio is 100% accessible. You will need a cable
with a DB9 female connector on each end. The cable is a straight through
cable, so don't let anyone try to sell you a null modem cable. The cable
is available in the states from Radio Shack, among other sources.
73, de Lou K2LKK
At 06:41 AM 8/1/2006 +0100, you wrote:
>What is this memory software for the 2000?
>
>David
>
>
>In message <[log in to unmask]>, Colin McDonald
><[log in to unmask]> writes
> >i have used both extensively.
> >The ts2000 is nearly the exact same size as the ts570.
> >i think the only difference between the two is that the 2000 has a different
> >shape to the face...its rounded on the corners and not square like the 570.
> >When i say nearly the same size, it may well be a few milimeters smaller or
> >bigger, but if you put the two radios on top of each other, they are exactly
> >the same.
> >The 2000 doesn't speak PL tones, however, as with all the kenwood dual
> >banders, you can enter them via the mike keypad or by counting clicks on the
> >multi-control knob.
> >The TNC is built in, as is the antenna tuner.
> >The ts2000 comes stock with the same microphone as the 570...that little
> >narrow handheld mike don't remember the model number.
> >You may wish to get a DTMF mike when you get the radio since there is no
> >DTMF capability from the front of the radio.
> >Mine didn't come with control software, and i don't think its free from
> >kenwood
> >However, the memory and menu setup software is free and very accessible with
> >jaws.
> >This will allow you to set up all your memories with PL, offset, tone, DCS,
> >and what ever else the memories can hold.
> >The radio comes with all necesary accessoreis such as accessory plug jacks
> >and amplifier jack plugs and extra fuses and mounting screws.
> >The 2000 also employs beeps at the extremes of the scrolling settings...that
> >means for instance when you set power, it will beep when it reaches the
> >highest, and beep whenit reaches the lowest...this holds true for all
> >adjustable settings on the radio. It also only goes to either extreme and
> >will not roll over back to the highest setting or lowest setting when
> >turning the knob, just like the 570.
> >I hope that answers all your questions?
> >If you have anymore, dont' hesitate to ask!.
> >73
> >Colin, V A6BKX
> >----- Original Message -----
> >From: "Richard Fiorello" <[log in to unmask]>
> >To: <[log in to unmask]>
> >Sent: Monday, July 31, 2006 5:24 PM
> >Subject: ts2000
> >
> >
> >> Hi everyone;
> >> Its fun to get curious as long as I don't get my credit card out. I may
> >> look on line for specifics but if anyone has owned the 570 and the ts2000
> >I
> >> am curious as to generally how much bigger the ts2000 is?
> >> Secondly, does the ts2000 speak pl tones as the 707 does?
> >> Finally, what comes with the radio and what accessories does one need?
> >No,
> >> forget 1.2 gig
> >> Obviously one needs the vs3 and apparently there are no filters to buy.
> >Is
> >> the tnc an accessory or is it part of the standard radio? is the software
> >a
> >> free download? i thought that kenwoods software was free but when looking
> >> at the higher priced ts2000le they make a fuss about the fact that they
> >> include the software.
> >> Can't imagine using 2 meter ssb but I suppose you never know.
> >> Rich
> >>
>
>--
>David W Wood
Louis Kim Kline
A.R.S. K2LKK
Home e-mail: [log in to unmask]
Work e-mail: [log in to unmask]
Work Telephone: (585) 697-5753
|