Here's another thing interesting about this problem. On the b band, I have
to hold the mono button to hear anything. I'm not sure what to do with the
radio now. I may have to get sighted help.
----- Original Message -----
From: "David R. Basden" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, May 21, 2006 2:23 PM
Subject: Re: Storing a Frequency in TH-F6A Memory
>I had a similar problem this past week. Resetting didn't seem to
> solve the problem either. You may have locked the keyboard by
> holding down the A key for more than one second. Repeat the action
> to unlock it. That wasn't my problem though. I managed to get it to
> straighten out by using the menu up arrow and then selecting. I have
> no idea what I did to create the problem or even what I did to set
> things straight. If all else fails, give the menu thing a try.
>
>
>
> At 07:28 AM 5/21/2006, you wrote:
>>All I get is the same high beep like the keys are locked when I press the
>>7
>>key. The rest of the keys work. Perhaps I should do a reset of the
>>radio.
>>----- Original Message -----
>>From: "John Miller" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Saturday, May 20, 2006 9:06 PM
>>Subject: Re: Storing a Frequency in TH-F6A Memory
>>
>>
>> > you shouldn't, the tone key is number 7, then you hit function and the
>> > 7
>> > again and tune to the tone you want.
>> > ----- Original Message -----
>> > From: "Russ Kiehne" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Saturday, May 20, 2006 2:33 PM
>> > Subject: Re: Storing a Frequency in TH-F6A Memory
>> >
>> >
>> >> Speaking of the thf6a, What's the trick to programming a pl? When I
>> >> press
>> >> the ttone key, all I get is a high beep.
>> >> ----- Original Message -----
>> >> From: "David R. Basden" <[log in to unmask]>
>> >> To: <[log in to unmask]>
>> >> Sent: Saturday, May 20, 2006 11:12 AM
>> >> Subject: Storing a Frequency in TH-F6A Memory
>> >>
>> >>
>> >>>I have apparently forgotten how to store a frequency in a memory
>> >>> channel on the TH-F6A. That is if I ever knew. I used to use the
>> >>> software, but have misplaced my cable. The manual seems to describe
>> >>> using the tuning knob to find the channel, but it would be easier not
>> >>> to say more accessible if I could directly enter the channel number
>> >>> in which I want to store the current frequency. Is this
>> >>> possible? If so, how? Thanks.
>> >>>
>> >>> de W7OQ, Dave
>> >>>
>> >>>
>> >>>
>> >>
>> >>
>> >
>> >
>> >
>>
>>
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 5/19/2006
>
>
>
|