>I am looking for some direction on the easiest
>way to network two PC's. Both machines will be
>running Windows 95. I have a couple of Ethernet
>NIC's if they could be used to accomplish this.
Steve,
Here's a summary of the last thread that I
kept on this. Hope it helps!
1. Install AND configure the NIC.
2. Install the device driver for the NIC.
3. Install a protocol (NETBEUI works) for the
device driver.
4. Install a service (CLIENT FOR MICROSOFT
NETWORKS is normal)
5. Turn on file and/or print sharing in at least
one PC
6. Each PC must be identified and included in the
same workgroup.
If using co-axial 10base2 cable then make sure
one end is grounded and both ends are terminated
with a 50ohm resistor.
Use RG-58 cable.
Best of luck!
*************************************************
Lance Kephart
Kephart's Korner
http://www.geocities.com/siliconvalley/vista/7192
*************************************************
Get your FREE, private e-mail
account at http://www.mailcity.com