Subject: | |
From: | |
Reply To: | |
Date: | Tue, 14 Nov 2006 13:42:38 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Ok my apologies
I do not always get the same readings for the forward power reflected
power, and swr twice. For example I test 1 frequency on a particular
power setting, and move on to some other frequencies. However if I get
back to, say the first I've tested, the read-out is not what it was the
first time. I hope this helps.
Kallie Swanepoel
http://www.kallieswanepoel.co.za
-----Original Message-----
From: For blind ham radio operators
[mailto:[log in to unmask]] On Behalf Of Colin McDonald
Sent: 14 November 2006 10:46
To: [log in to unmask]
Subject: Re: TW1 Inconsistancy
what sort of inconsistancies are you getting with the tw1?
Just saying you get inconsistancies and not explaining doesn't allow
anyone to really give you hints or anything as to what the problem may
be, or if its just a function of the meter. Running the tw1 on the same
power supply shouldn't be an issue unless you have some kind of ground
loop issue or RF getting into the meter, but that is unlikely. 73 Colin,
V A6BKX
----- Original Message -----
From: "Kallie Swanepoel" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, November 13, 2006 9:47 PM
Subject: TW1 Inconsistancy
> Hi All
>
> I purchased a tw1 this week end, and find it a bit inconsistant with
> the read-outs. I connected it to the same power supply than I have my
> TS2000 on. Would that have any influence? What power supply should I
> use, or should I use a battery?
>
> Kallie Swanepoel
> http://www.kallieswanepoel.co.za/
|
|
|