Hi Tom and the group. WHat problems are you havign with the F6a? I have
programmed the GMRS/FRS radio frequencies with no probelm, and you can't
enter in the frequencies exactly down to a single KHz as you probably know
by now, but I have done it, and turned the tuning knob and I am on
frequency. You can't transmit on these freqs without modifying the radio,
and you search for PL/DPLs the same way you do wtih repeaters on these
frequencies.
On Mon, 19 Jun 2006, T Behler wrote:
> John:
>
> Well, I'm rapidly coming to the conclusion that it's time to go back to the
> manual. I'm also a member of the THF6A users group, although I'm a bit
> reluctant to bring this up on there since they may not be as good at giving
> programming instructions to folks like us.
>
> Anyway, I'll keep everyone posted on this little problem for sure.
>
> If anyone has a flash of brilliance about what my problem might be, please
> feel free to share it.
>
> Otherwise, I'll keep working the problem until I somehow get things right.
>
> 73 from Tom Behler: KB8TYJ
>
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, June 19, 2006 10:06 AM
> Subject: Re: entering FRS and GMRS frequencies into THf6A
>
>
> > Mine I just hit the numbers until it gets the long beep and it's there,
> > usually a digit or 2 ahead of time, but it rounds it right, I even had
> > someone confirm that with me last night to make sure I gave you good info.
> I
> > might have changed mien and didn't remember, I might have mine set to a
> > lower step size but I didn't think so.
> > ----- Original Message -----
> > From: "T Behler" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Monday, June 19, 2006 9:54 AM
> > Subject: Re: entering FRS and GMRS frequencies into THf6A
> >
> >
> > > John:
> > >
> > > Is the default 12.5 KHZ?
> > >
> > > If so, this is where my thf6a is set.
> > >
> > > Now, can you tell me exactly how to enter the following frequency on the
> B
> > > band?:
> > >
> > > 462.5625
> > >
> > > As a college professor with a PHD, I can't believe I'm so challenged
> with
> > > this problem. Either that, or something is weird with my THF6A that I
> > > haven't figured out yet. HI! HI!
> > >
> > > Thanks to all on the group for your patience here.
> > >
> > > 73 from Tom Behler: KB8TYJ
> > >
> > > ----- Original Message -----
> > > From: "John Miller" <[log in to unmask]>
> > > To: <[log in to unmask]>
> > > Sent: Sunday, June 18, 2006 11:37 PM
> > > Subject: Re: entering FRS and GMRS frequencies into THf6A
> > >
> > >
> > >> if you set the step small it should work. Mine is at the default and it
> > > set
> > >> those
> > >> frequencies in right.
> > >> ----- Original Message -----
> > >> From: "T Behler" <[log in to unmask]>
> > >> To: <[log in to unmask]>
> > >> Sent: Sunday, June 18, 2006 10:45 PM
> > >> Subject: Re: entering FRS and GMRS frequencies into THf6A
> > >>
> > >> > Steve:
> > >> >
> > >> > Well, I just checked with my XYL, and she says that the step is
> already
> > >> > set
> > >> > at 12.5. It still won't let me put the last digit in. When I enter
> > >> > 462.5625, I get a long beet when hitting the last 2, and it rounds it
> > > off
> > >> > to
> > >> > 462.550.
> > >> >
> > >> > Is there something I need to adjust in the menus?
> > >> >
> > >> > By the way: the step can be adjusted, as you said, by using the
> > > function
> > >> > key and then 0.
> > >> >
> > >> > If someone can give me a step-by-step procedure on this one, I'd
> > >> > appreciate
> > >> > it.
> > >> >
> > >> > 73 from Tom Behler: KB8TYJ
> > >> >
> > >> >
> > >> > ----- Original Message -----
> > >> > From: "Steve Dresser" <[log in to unmask]>
> > >> > To: <[log in to unmask]>
> > >> > Sent: Sunday, June 18, 2006 10:08 PM
> > >> > Subject: Re: entering FRS and GMRS frequencies into THf6A
> > >> >
> > >> >
> > >> >> Tom,
> > >> >>
> > >> >> You have to change the frequency step from 25 to 12.5
> > >> >> KHz. Otherwise, the radio rounds off the last digit. Changing the
> > >> >> step is most easily done with the software. To do it on the radio,
> I
> > >> >> think you have to press Function-0 and rotate the tuning knob to the
> > >> >> appropriate setting.
> > >> >>
> > >> >> Steve
> > >> >>
> > >> >> On Sunday 6/18/06 20:29 T Behler wrote:
> > >> >> >Hi, all.
> > >> >> >
> > >> >> >Thanks to Bob (K8LR), I now have the first 14 FRS channel
> > >> >> >frequencies,
> > >> > and
> > >> >> >since the first 7 correspond with GMRS channels, this gives me
> > > something
> > >> > to
> > >> >> >work with.
> > >> >> >
> > >> >> >However, I have an interesting problem when trying to enter these
> > > freqs
> > >> > into
> > >> >> >my Kenwood THF6A.
> > >> >> >
> > >> >> >when I try entering the FRS frequencies via the keypad on band B.
> > >> >> >of
> > >> > the
> > >> >> >Kenwood THF6A HT, I
> > >> >> >get a long beap before I can key in the last of the four digits
> after
> > >> >> >the
> > >> >> >decimal point.
> > >> >> >
> > >> >> >Do I need to do something to get the THF6A to accept this fourth
> > > digit,
> > >> > or
> > >> >> >do I just enter the first three digits after the decimal point and
> > >> >> >use
> > >> > the
> > >> >> >tuning knob to fine tune it to the fourth digit?
> > >> >> >
> > >> >> >Thanks, and 73 from Tom Behler: KB8TYJ
> > >> >>
> > >> >
> > >> >
> > >>
> > >
> > >
> >
>
|