Steve:
We're already using the decimal point. My XYL toled me that it
automatically puts it in, but I still get the same thing even when I
manually enter the decimal point myself.
It's just really strange.
I'm usually not so stumped by this kind of thing either.
It's a bit humbling to be out-smarted by a radio! HI! HI!
73 de Tom Behler: KB8TYJ
----- Original Message -----
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, June 19, 2006 9:55 AM
Subject: Re: entering FRS and GMRS frequencies into THf6A
> Tom,
>
> When you enter the frequency, try using the decimal point. If you
> already are, then I'm stumped.
>
> Steve
>
> On Sunday 6/18/06 22:45 T Behler wrote:
> > Steve:
> >
> >Well, I just checked with my XYL, and she says that the step is already
set
> >at 12.5. It still won't let me put the last digit in. When I enter
> >462.5625, I get a long beet when hitting the last 2, and it rounds it off
to
> >462.550.
> >
> >Is there something I need to adjust in the menus?
> >
> >By the way: the step can be adjusted, as you said, by using the function
> >key and then 0.
> >
> >If someone can give me a step-by-step procedure on this one, I'd
appreciate
> >it.
> >
> >73 from Tom Behler: KB8TYJ
> >
> >
> >----- Original Message -----
> >From: "Steve Dresser" <[log in to unmask]>
> >To: <[log in to unmask]>
> >Sent: Sunday, June 18, 2006 10:08 PM
> >Subject: Re: entering FRS and GMRS frequencies into THf6A
> >
> >
> > > Tom,
> > >
> > > You have to change the frequency step from 25 to 12.5
> > > KHz. Otherwise, the radio rounds off the last digit. Changing the
> > > step is most easily done with the software. To do it on the radio, I
> > > think you have to press Function-0 and rotate the tuning knob to the
> > > appropriate setting.
> > >
> > > Steve
> > >
> > > On Sunday 6/18/06 20:29 T Behler wrote:
> > > >Hi, all.
> > > >
> > > >Thanks to Bob (K8LR), I now have the first 14 FRS channel
frequencies,
> >and
> > > >since the first 7 correspond with GMRS channels, this gives me
something
> >to
> > > >work with.
> > > >
> > > >However, I have an interesting problem when trying to enter these
freqs
> >into
> > > >my Kenwood THF6A.
> > > >
> > > >when I try entering the FRS frequencies via the keypad on band B.
of
> >the
> > > >Kenwood THF6A HT, I
> > > >get a long beap before I can key in the last of the four digits after
the
> > > >decimal point.
> > > >
> > > >Do I need to do something to get the THF6A to accept this fourth
digit,
> >or
> > > >do I just enter the first three digits after the decimal point and
use
> >the
> > > >tuning knob to fine tune it to the fourth digit?
> > > >
> > > >Thanks, and 73 from Tom Behler: KB8TYJ
> > >
>
|