Clyde W. Burns writes:-
<<< Ireplaced the cmos battery and brought up the set up menu and set the bios to default settings, exited the menu and got a both input signals missing error and then computer specs and at the bottom, disk error 1/0 replace disk hit any key. I tried starting it with a windows 95 boot disk but same thing>>>
Hi,
assuming that you have set up to boot from floppy (the default settings referred by you is the same) and you are still getting " disk error",
the only logical conclusion is the floppy drive is bad.
the best course IMHO is to see if you can borrow a floppy drive and replace it in the system and see if any joy results.
on a side note floppy drives are dead cheap, but why pay even that, till you are sure of the causes.
good luck----Venkat
PCBUILD's List Owners:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>