Sender: |
|
Date: |
Fri, 23 Jan 2009 10:25:52 -0600 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset=ISO-8859-1 |
From: |
|
Parts/Attachments: |
|
|
Pete,
I found usb card readers on ebay for under $3 with free shipping. So that's
what I'm going to do. They look like thumb drives.
Diane
On Thu, Jan 22, 2009 at 1:56 PM, Pete B. <[log in to unmask]> wrote:
> Diane,
> Also check to see if the card is marked "HC"...High Capacity. These cards
> are also not supported by the older SD card readers, but most new ones will.
> -Pete
>
>
>
> Diane wrote:
>
>> The card is trying to be used in an HP computer. It's 4GB and the highest
>> it's read is 2GB. I checked their web site and there might be a limit.
>> It
>> works on my newer computer with Vista. It wasn't seen when I plugged in
>> the
>> mp3 player with the card inside. So I need to get a usb card reader.
>> Will
>> any do?
>>
>> Diane
>>
>> On Thu, Jan 22, 2009 at 8:35 AM, Hachmeyer, Mr. Paul S. <
>> [log in to unmask]
>>
>>
>>> wrote:
>>>
>>>
>>
>>
>>
>>> Be careful if you decide to format the card. If the card is for camera
>>> use, only delete files and format it in the camera. I have a couple
>>> cards
>>> that were formatted in a pc that will not work in a camera because the
>>> format is different. They can sometimes be fixed with a hex editor, but
>>> it
>>> is a pain. Have you tried it in a camera?
>>> Paul Hachmeyer
>>> ________________________________________
>>> From: Personal Computer Hardware discussion List [
>>> [log in to unmask]] On Behalf Of Diane [[log in to unmask]]
>>> Sent: Friday, January 16, 2009 6:21 PM
>>> To: [log in to unmask]
>>> Subject: [PCBUILD] MIcro Card
>>>
>>> Dear Listers,
>>>
>>> I just bought a new Sandisk 4GB micro card on Ebay. I get an error
>>> message
>>> when I put it in my card reader:
>>>
>>> "L :\is not accessible. The request could not be performed because of an
>>> I/O device error."
>>>
>>> I thought maybe it needs to be formatted. But I've never had to format a
>>> micro card before.
>>>
>>> Running XP2
>>>
>>> Diane Kroeckel
>>>
>>>
>>> Do you want to signoff PCBUILD or just change to
>>> Digest mode - visit our web site:
>>> http://freepctech.com/pcbuild.shtml
>>>
>>>
>>>
>>>
>>
>> Do you want to signoff PCBUILD or just change to
>> Digest mode - visit our web site:
>> http://freepctech.com/pcbuild.shtml
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - http://www.avg.com Version: 8.0.176 / Virus Database:
>> 270.10.12/1909 - Release Date: 1/22/2009 7:08 AM
>>
>>
>>
>
> Do you want to signoff PCBUILD or just change to
> Digest mode - visit our web site:
> http://freepctech.com/pcbuild.shtml
>
>
The NOSPIN Group is now offering Free PC Tech
support at our newest website:
http://freepctech.com
|
|
|