BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Kenneth Lee <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Sat, 25 Feb 2006 16:12:55 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (100 lines)
From the manual:
#15.1 Activating Microphone Control

1 Press MENU second button on right under the On/Off switch to enter the
Menus

2 Use tuning knob to go to Menu 16, Microphone is on the display

3 On the display there is a right facing arrow above the third of the four
buttons under the display. Press until display says Mic Control. If you go
too
far there is a left facing arrow under the second button to go back

4 Press Set, the right of the four buttons to toggle the function On.
Display
says On

5 Press MENU to exit the Menu mode.

#16 PACKET OPERATION - omitted in this version

#17 REPEATER FUNCTION

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of T Behler
Sent: Saturday, February 25, 2006 12:12 PM
To: [log in to unmask]
Subject: Re: still struggling with TMV7A program memory problem


Paul and everyone:

Well, we're making progress here.

I did your step, Paul, and now the VFO's are back to the factory default
settings, and my memories are fine.

Now, can someone tell me how to turn the mic control  function back on, and
how to re-activate the audible DTMF tones?

Once I get those things done, I will be all set.

Thanks as always for your help.

Best 73 from Tom Behler: KB8TYJ

----- Original Message ----- 
From: "Paul Bolduc" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, February 25, 2006 11:40 AM
Subject: Re: still struggling with TMV7A program memory problem


> Good morning Tom and the list,
>
> I'm quite sure of this step, but you might want to have it confirmed.
>
> Turn off the rig.
> Hold the VFO button down while turning it back on.
> Hit the VFO button again and then Memory recall and all your memory
settings will stay, but all menu items should default to factory settings.
>
> I think if you hold down the Memory Recall button and then turn it on it
will erase all memory items and all menu items as well.
>
> If this is not correct somebody please speak up.
>
> 73,
>
> Paul  WR1X
>   ----- Original Message ----- 
>   Hi, all.
>
>   I am working to get my TMV7A back to normal after it was somehow
>   re-programmed during last week-end's emergency shelter communications
event,
>   and I am now convinced that my main problem is with the program memory
>   function.
>
>   Can someone tell me how to erase program memories in the TMV7A?  I think
>   that once I get rid of this program memory setting, I'll be pretty much
back
>   to normal.
>
>   Best 73 from Tom Behler: KB8TYJ
>

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date: 2/24/2006
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date: 2/24/2006
 

ATOM RSS1 RSS2