nope, not here it used too and i don't know what happened, but i would like
to get that feature re-enabled.
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, May 15, 2005 1:25 PM
Subject: Re: THF6A question
> mine, when I turn the tuning dial while scanning if it stops on a
> frequency,
> it resumes scanning.
> ----- Original Message -----
> From: "Michael Capelle" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, May 15, 2005 2:17 PM
> Subject: Re: THF6A question
>
>
> since we are on this thf6 topic, i have a thf6 radio here and one thing I
> notice is when scanning through the B band, instead of scanning the
> frequencies, whenever the transciever hits a station, it constantly locks
> it. I thought turning the VFO is supposed to resume scanning? If that is
> the case, then the vfo is not doing that and I have to reinitate the scan
> by
> holding function b to resume scanning. Any suggestions to why this is
> happening?
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, May 15, 2005 12:59 PM
> Subject: Re: THF6A question
>
>
>> it should transmit everywhere in the B band that it will in the A band.
>> ----- Original Message -----
>> From: "Walt Sebastian" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Sunday, May 15, 2005 1:48 PM
>> Subject: Re: THF6A question
>>
>>
>> Thanks again John,
>> I had sat the radio aside and I have forgotten a number of things. I
>> just
>> did a little experimenting. I see it works as you said in the B band.
>> If
>> it is in the A band, the function followed by the four key turns the
>> weather
>> channel on and off. Now that I know that it will be easier. Also when
>> in
>> the B band, it will not transmit on 2 meters.
>> Walt
>> WA4QXT
>> Quaker Hill CT
>> [log in to unmask]
|