PCBUILD Archives

Personal Computer Hardware discussion List

PCBUILD@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Peter Shkabara <[log in to unmask]>
Reply To:
PCBUILD - Personal Computer Hardware discussion List <[log in to unmask]>
Date:
Mon, 30 May 2005 15:06:58 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (29 lines)
After getting some feedback and searching some more on the net, it appears
that a "repair" indeed is quite expensive. To do it properly, it requires
removing the anti-glare coating and applying a new coat. This runs about
$250 for a screen the size I have. Cheaper than buying a new monitor, but I
think I can live with that small scratch after all ;)

I have also had suggestions for using Armor-All or some wax of some sort. I
might try one of these "solutions" to see if it does any good, and will give
feedback if it does.

Peter
-------------------------
[log in to unmask]

-----Original Message-----
It is virtually guaranteed that repairs like this will cost as much ormore
than a new LCD.  With prices dropping you can now get a Dell 2405 fpw (24"
LCD with PIP, PBP, and 12 ms response time for $900.  The Samsung 21" is now
(until 5/31) under $600 with a Samsung $100 rebate.  Smaller screens run
from $250 and up, and repairs that are as labor intensive and high tech as
fixing a scratch are going to be in excess of $300.  I would do that for a
fairly new $1,000 LCD, but not for an older smaller one (19" or less).

Frank Suszka <[log in to unmask]> wrote:

         PCBUILD maintains hundreds of useful files for download
                     visit our download web page at:
                  http://freepctech.com/downloads.shtml

ATOM RSS1 RSS2