I tried that with no luck.
----- Original Message -----
From: "David R. Basden" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, May 21, 2006 4:17 PM
Subject: Re: Storing a Frequency in TH-F6A Memory
> Keypad 5 selects the quelch adjustment. When selected, the runing
> knob can be used to adjust the squelch. Pressing Keypad again or the
> center of the eye will store the new squelch setting and return the
> radio to normal mode.
>
> At 03:26 PM 5/21/2006, you wrote:
>>Here's another thing interesting about this problem. On the b band, I
>>have
>>to hold the mono button to hear anything. I'm not sure what to do with
>>the
>>radio now. I may have to get sighted help.
>>----- Original Message -----
>>From: "David R. Basden" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Sunday, May 21, 2006 2:23 PM
>>Subject: Re: Storing a Frequency in TH-F6A Memory
>>
>>
>> >I had a similar problem this past week. Resetting didn't seem to
>> > solve the problem either. You may have locked the keyboard by
>> > holding down the A key for more than one second. Repeat the action
>> > to unlock it. That wasn't my problem though. I managed to get it to
>> > straighten out by using the menu up arrow and then selecting. I have
>> > no idea what I did to create the problem or even what I did to set
>> > things straight. If all else fails, give the menu thing a try.
>> >
>> >
>> >
>> > At 07:28 AM 5/21/2006, you wrote:
>> >>All I get is the same high beep like the keys are locked when I press
>> >>the
>> >>7
>> >>key. The rest of the keys work. Perhaps I should do a reset of the
>> >>radio.
>> >>----- Original Message -----
>> >>From: "John Miller" <[log in to unmask]>
>> >>To: <[log in to unmask]>
>> >>Sent: Saturday, May 20, 2006 9:06 PM
>> >>Subject: Re: Storing a Frequency in TH-F6A Memory
>> >>
>> >>
>> >> > you shouldn't, the tone key is number 7, then you hit function and
>> >> > the
>> >> > 7
>> >> > again and tune to the tone you want.
>> >> > ----- Original Message -----
>> >> > From: "Russ Kiehne" <[log in to unmask]>
>> >> > To: <[log in to unmask]>
>> >> > Sent: Saturday, May 20, 2006 2:33 PM
>> >> > Subject: Re: Storing a Frequency in TH-F6A Memory
>> >> >
>> >> >
>> >> >> Speaking of the thf6a, What's the trick to programming a pl? When
>> >> >> I
>> >> >> press
>> >> >> the ttone key, all I get is a high beep.
>> >> >> ----- Original Message -----
>> >> >> From: "David R. Basden" <[log in to unmask]>
>> >> >> To: <[log in to unmask]>
>> >> >> Sent: Saturday, May 20, 2006 11:12 AM
>> >> >> Subject: Storing a Frequency in TH-F6A Memory
>> >> >>
>> >> >>
>> >> >>>I have apparently forgotten how to store a frequency in a memory
>> >> >>> channel on the TH-F6A. That is if I ever knew. I used to use the
>> >> >>> software, but have misplaced my cable. The manual seems to
>> >> >>> describe
>> >> >>> using the tuning knob to find the channel, but it would be easier
>> >> >>> not
>> >> >>> to say more accessible if I could directly enter the channel
>> >> >>> number
>> >> >>> in which I want to store the current frequency. Is this
>> >> >>> possible? If so, how? Thanks.
>> >> >>>
>> >> >>> de W7OQ, Dave
>> >> >>>
>> >> >>>
>> >> >>>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> >
>> >>
>> >>
>> >>
>> >>
>> >>--
>> >>No virus found in this incoming message.
>> >>Checked by AVG Free Edition.
>> >>Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date:
>> >>5/19/2006
>> >
>> >
>> >
>>
>>
>>
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 5/19/2006
>
>
>
|