Hi Clarence.
Was your interface jumpered to get power from the rig, or did you have to
change that?
--Lou K2LKK
At 10:17 AM 7/23/2005 -0400, you wrote:
>Hello,
>Yes there are jumpers that need to be set. When mfj delivered mine, the
>jumpers were set. I checked the settings with the manual to be sure of
>this. It isn't hard to do. My xyl read the manual and checked them against
>it. There is also a jumper to tell the interface to get the power for the
>tuner from the rig or not. I suspect that the 2000 is capable of suplying
>the 12 vdc to the tuner.
>The setup really works nice. When you have it all hooked up, the tune
>button on the front of the radio will control the tuner.
>If I can help, let me know.
>73,
>Clarence
>
>----- Original Message -----
>From: "Louis Kim Kline" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Saturday, July 23, 2005 12:04 AM
>Subject: Re: MFJ 993 and TS2000S
>
>
> > Hi Clarence.
> >
> > A friend was looking at the manual for the Kenwood-Yaesu interface and
> > indicated that there are some jumpers that have to be set for the radio
> > being used, so I guess I'm at a stand still until I can get together with
> > someone sighted.
> >
> > 73, de Lou K2LKK
> >
> > At 08:03 PM 7/22/2005 -0400, you wrote:
> >>Hello,
> >>I don't know about the 2000, but with the 570 you don't have to do
> >>anything.
> >>I just plugged in the interface cable.
> >>73,
> >>Clarence
> >>
> >>----- Original Message -----
> >>From: "Louis Kim Kline" <[log in to unmask]>
> >>To: <[log in to unmask]>
> >>Sent: Thursday, July 21, 2005 8:52 PM
> >>Subject: MFJ 993 and TS2000S
> >>
> >>
> >> > Hi.
> >> >
> >> > Has anyone operated the Kenwood TS2000S with the MFJ993 Auto Tuner yet?
> >> > I
> >> > have the Kenwood interface for the MFJ 993, and I'm wondering if there
> >> > is
> >> > anything I need to do to the Kenwood TS2000S (other than plug in the
> >> > interface and run the coax to the tuner) to let the Kenwood TS2000S
> >> > know
> >> > that there is an external tuner that it should use in place of the
> >> > internal
> >> > one when on antenna 1.
> >> >
> >> > I haven't had a chance to get to MFJ's web site to see if the
> >> > instructions
> >> > are available up there or if I'll have to scan them. Does anyone on
> >> > the
> >> > list know?
> >> >
> >> > 73, de Lou K2LKK
> >> >
> >> >
> >> >
> >> > Louis Kim Kline
> >> > A.R.S. K2LKK
> >> > Home e-mail: [log in to unmask]
> >> > Work e-mail: [log in to unmask]
> >> > Work Telephone: (585) 697-5753
> >
> > Louis Kim Kline
> > A.R.S. K2LKK
> > Home e-mail: [log in to unmask]
> > Work e-mail: [log in to unmask]
> > Work Telephone: (585) 697-5753
Louis Kim Kline
A.R.S. K2LKK
Home e-mail: [log in to unmask]
Work e-mail: [log in to unmask]
Work Telephone: (585) 697-5753
|