unfortunately, unless I can track one down with all 3 output leads, this is
not an option, as you can't even get those cables anymore. I saw one of
them going a few months ago, but it only had the one cable, and when I
checked, the cables just couldn't be had for love nor money.

Simon



At 02:28 PM 12/4/04, you wrote:
>They haven't made that mic in over 10 years and I don't see them used too
>often anymore but if you can find one that is an option.
>----- Original Message -----
>From: "Bob -- KA5ETA" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Saturday, December 04, 2004 9:24 AM
>Subject: Re: looking for 2 bits if available.
>
>
> > If you are using Kenwood radios there is a mic that will do what you are
> > wanting to do.  It is the mc 85.  In fact it will allow you to use three
> > radios with the one mic.  I don't know if Kenwood is still making them or
> > not but I am sure you could find one on ebay.
> > Hope this helps you.
> > ----- Original Message -----
> > From: "goshawk" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Saturday, December 04, 2004 6:36 AM
> > Subject: looking for 2 bits if available.
> >
> >
> >> hello list, I am looking for the following if available at all.
> >> first, does anyone know if there is a switch box that will let you use 1
> >> mic with 2 or more radios?
> >> second, does anyone know if there is an in-line DTMF unit, that could be
> >> put between a desk mic and a radio?
> >> would prefer to purchase in the UK if possible, but am willing to
> >> purchase
> >> elsewhere if not found in the UK.
> >>
> >> if anyone has either of these bits, or knows where I can find either or
> >> both of them, please either call on 02084785841, or e-mail to,
> >> [log in to unmask]
> >> thanks.
> >>
> >> Simon
> >>
> >