It should take care of things as I had the same problem when I first got
mmine.  Do you have a frequency with a PL or DPL programmed in?  If so,
that will mute squelch out too sometimes if you have set it for endode and
decode.





On Fri, 5 Nov 2004, Don Risavy, jr; NR4DR wrote:

> will give that a try and see if takes care of my problem and wil also print the instructions out to take with me on my trip in case need sighted assistance.
>
> Do you think this wil take care of no squeltch too as that's not even opening or coming on e
> either?
>
> Tnx cul 73 nr4dr
>
> >
> > From: Jeff Kenyon <[log in to unmask]>
> > Date: 2004/11/05 Fri AM 08:42:39 EST
> > To: [log in to unmask]
> > Subject: Re: Resetting th-f6a
> >
> > Hi Don, you need to hold down the function key when you turn the aradio
> > on, and then either move the menu key up three times, or use the knob and
> > turn it three times and then press menu twice and that should take care of
> > it.  The key beep to turn that off is menu No. 19 and that is what you got
> > into.  Not sure off the top of my head about no. 9 in the menus.  Has
> > anyone had a problem with the radio not working after it has been put on
> > the charger after a use where it gets really hot, and it is placed on the
> > charger immediately afterwords?  I had this happen a week ago, and cleaned
> > it out and let it rest and it worked later.
> >
> >
> >
> >
> >
> > On Fri, 5 Nov 2004, Don Risavy, jr; NR4DR wrote:
> >
> > > Hello,
> > >
> > > Wondered is there a way to completely and or fully reset the th-f6a back to the factory defaults?
> > >
> > > Somehow not sure what wound up dooing; but, my th-f6a completely  quit beeping and there's also no squeltch noise coming from the radio.
> > >
> > > i was trying to get to the menu 9 and was using the joy stick button above the power on/off switch and eventually everything just quit.
> > >
> > > i did try switching to the spare battery pack that have which is the 4 pack dry cell pack that you put your own batteries into and that didn't seem to work either.
> > >
> > > So am hoping didn't damge or hurt the radio which it's new.
> > >
> > > So figured would write to see if anyone has ran into this problem before with their th-f6a and if so how went about fixing it?
> > >
> > > Please let me know something asap i.e. before 12 PM ct. since am at work where can find sighted assistance before leave early for the day.
> > >
> > > Tnx cul 73 nr4dr.
> > >
> >
>