Hello Steve.

Thank you very much for your help. I have nearly mastered most of the
features of this rig but have some things yet to learn. I'm a bit surprised
at the rather short battery life I experienced for the first time but,
perhaps, I had not charged the battery sufficiently the first time, 6-1/2
hours.

Hello to Martia. Again, my thanks.

Jerry


----- Original Message -----
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, October 21, 2004 10:19 AM
Subject: Re: th-f6a & writing data to memories


> Jerry,
>
> It's important to note that memories that have never been written don't
> appear as you rotate the tuning knob.  However, it is still possible to
> select any memory for writing.  For example, suppose you have written to
> memory 9 and now want to store something in memory 10, which up to now has
> not been written.  Press the Memory key and select memory 9, either by
> rotating the tuning knob or directly entering the memory number from the
> keyboard.  Then switch to the VFO where, presumably, you have stored the
> data you want to write.  Press the Function key and rotate the tuning knob
> clockwise one click.  You are now ready to write to memory 10 by pressing
> the Memory key.  Note that you could have written to another higher memory
> by simply rotating the tuning knob clockwise the appropriate number of
> clicks.  Similarly, you could have selected a lower memory by rotating the
> knob counter-clockwise.  You can even access the Priority, Information,
and
> scanning range memories by rotating the tuning knob counter-clockwise
> beyond memory 0.  I'm not certain of the order, but I believe the
> information memories are closest to 0, and are in decreasing sequence.  I
> find it much easier to change these memories using the software, although
I
> have successfully done so using the method described above.
>
> Steve
>
> On Tuesday 10/19/04 23:21 Jerry Neufeld wrote:
>
> >Hello folks.
> >
> >What would I do without this list! I now have my th-f6a and like
everything
> >I've seen. I have not been able to figure out, however, how I can write
> >repeater frequencies and related data to sequencial memories. From what I
> >see, memory storage is not incremental. Nor would I have expected it to
be.
> >Memory 01 simply gets overwritten. Is there a way to either specify a
> >particular memory via the keypad or increment a memory location by 1 to
> >store a new location? And, are the memories independent of bands?
> >
> >Thanks to any who knows and who is willing to share their wisdom.
> >
> >Jerry