Sounds like you have the tones on for receive and transmit with the wrong
receive tone in,  the 7 key will fix that, if you want to have no tone, keep
hitting it until you get the low tone, if you want to transmit a tone, hit
it 1 high beep past the low beep. If that doesn't do it, check your squelch
setting, hit the #5 key, then turn the tuning dial on top of the radio
counter clockwise until you get a lot beep, then I have mine 1 click to the
right after that so it just stops the noise, then hit the 5 key again to
save the setting.
----- Original Message -----
From: "Walt Sebastian" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, June 29, 2004 7:38 AM
Subject: THF6A PROBLEM


> Hi guys,
> I now have the Kenwood THF6A.  I have a few repeaters etc. programmed in.
> The problem is that I have gotten it into a strange mode.  If I key a
> repeater or even want to listen to it, I have to hold the lower button
under
> the PTT button that opens the squelch.  How can I fix it.  I don't want to
> walk around holding that button.  Thanks and 73.
>
> Walt
> WA4QXT
> New London CT
> [log in to unmask]
>