BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
John Miller <[log in to unmask]>
Reply To:
Blind-Hams For blind ham radio operators <[log in to unmask]>
Date:
Fri, 28 May 2004 17:38:07 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (82 lines)
No one does 9600 baud packet anyway, or I've never heard of anyone, Used
TNC's aren't very much if you look in the right places.
----- Original Message -----
From: "Brent Harding" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, May 28, 2004 5:23 PM
Subject: Re: HT purchase! Wahoo!


> Yeah, the kenwood gets sort of hot when high power is used, that's how I
run
> it all the time as half a watt isn't enough to do much, low power should
be
> 2 watts and economic at 1, but it's 5, 0.5 and .05 for the power levels.
I'm
> looking to get a spare battery and better antenna. I get a lot of intermod
> on uhf only if I operate with the B receiver, the one that does general
> coverage as well. I don't know yet how it works with packet though, as I
> don't have a TNC (they seem quite expensive for some reason, at least 9600
> baud ones)
>
> ----- Original Message -----
> From: "Buddy Brannan" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, May 28, 2004 11:24 AM
> Subject: HT purchase! Wahoo!
>
>
> > Hi y'all,
> >
> > OK, so I'm finally going to get rid of this IC-T81A that I got from my
> > uncle some time ago...anyone who wants to know...it's not an easy HT
> > for a blind ham to operate. Finally decided it's time to stop fighting
> > it and get a radio that's easier to use. My good ol' ADI AT-600
> > died...so...of course, it's the usual question: Icom IC-T90A or
> > TH-F6A. I looked at some reviews, and it seems the Icom may have a
> > better receiver, but some reviews seem to indicate the Kenwood is
> > built a bit sturdier (at least, the antenna connector is better), and
> > it seems like it's easier to use and set up. Also, the accessories are
> > cheaper and the battery is bigger. Couple more questions though:
> >
> > 1. Anyone found a better after-market rubber duckie for 2/220/440 than
> > what it comes with? $45 or $50 for a rubber duckie from Kenwood seems,
> > ah, a bit excessive.
> >
> > 2. What about the Batteries America or Maha battery? The Maha is
> > bigger and $10 les than the Kenwood one; the Batteries America one is
> > really cheap. Will either of them charge with the included Kenwood
> > charger, or do I need to shell out extra bucks for a drop-in charger?
> >
> > 3. All HT's get hot when using high power. One review indicated this
> > one has a lot of plastic and not much of a heat sink...does this rig
> > get noticeably hotter than others in your experience?
> >
> > 4. What about overload/intermod/etc.? Of course, I expect some in any
> > HT on a decent antenna. How does the TH-F6A compare to, say, the
> > FT-530 or FT-51 Yaesu, for instance?
> >
> > 5. Should I reconsider and get the Icom instead?
> >
> > While the SW coverage and wideband receive is nice, they're sort of
> > minor considerations. I don't plan to use the shortwave receiver for
> > any more than very casual listening anyway. I nderstand the Icom has a
> > better receiver for UHF TV...not quite enough to sway my decision,
> > though, but something else might be.
> >
> > Oh yes. One more. Who has the best price? Gigaparts has the TH-F6A for
> > $299 (including shipping, apparently); the Icom for like $249. Anyone
> > got a better price? I haven't seen a better price. Found Gigaparts
> > once for a sweepstakes. They have another sweepstakes now if anyone
> > wants to win a TS-480SAT...course...I'm gonna win it this month...this
> > is my month :)
> >
> > Vy 73,
> > --
> > Buddy Brannan, KB5ELV
> > ------------------------------------------------------------
> > Help us bring our child home! Visit http://ouradoption.brannan.name to
> > find out how.
> >
>

ATOM RSS1 RSS2