Steve:

Yeah, maybe Don is right.

If you look it up and find something else, let me know.

Thanks again, and best 73 from Tom Behler: KB8TYJ

----- Original Message -----
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, May 27, 2004 2:29 PM
Subject: Re: THF6A mic gain setting?


> Maybe you're right, Don.  I just assumed that the menu setting affected
> both receive and transmit., but I never verified that.
>
> Steve
>
> On Thursday 5/27/04 12:37 Don Bishop wrote:
>
> >Steve,
> >
> >I thought the mode change was a receive-only change.
> >
> >Maybe I'm wrong, but I don't recall seeing anything in the manual about
> >mode changes to the transimtter.
> >
> >Don W6SMB
> >
> >On Thu, 27 May 2004 12:25:41 -0400, Steve Dresser wrote:
> >
> >Tom,
> >
> >You'd probably have to look at a schematic to find the adjustment,
assuming
> >there is one.  Before you do that, you might want to check to see if
you're
> >in narrow band mode.  That's a menu setting, and changing it to wide may
> >give you a bit more gain.  I don't remember which setting it is, but I'll
> >research it if you want me to.
> >
> >Steve
> >
> >On Thursday 5/27/04 11:49 Tom Behler wrote:
> >
> > >Hi, all.
> >
> > >Does anyone know if the mic gain can be adjusted on the Kenwood THF6A
HT?
> >
> > >I have been consistently getting reports that the audio on my THF6A is
much
> > >lower than some other Ht's I have, like the HTX202 and 404, and wonder
if I
> > >could adjust the mic gain on the THF6A to make things more equal.
> >
> > >People tell me that my signal is strong; it's just that the audio is
low.
> >
> > >I can't seem to find a mic-gain adjustment in the manual, although I
haven't
> > >had lots of time to spend looking.
> >
> > >Thanks, and best 73 from Tom Behler: KB8TYJ