Sender: |
|
Date: |
Wed, 4 Feb 2004 11:25:14 -0500 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset=us-ascii; format=flowed |
From: |
|
Parts/Attachments: |
|
|
Are you using an additional power supply for the usb hub? The camera needs
power to work, and the pc power via the hub is not adequate. The printer will
work fine without the external power.
Pete Sowerby wrote:
> Hi there
>
> I've got a small 4 port USB hub that plugs into one of the USB ports on my PC. At the moment I have a digital camera/webcam and my Epson printer connected via this.
>
> The problem is that although it works fine initially, it appears to stop working and my system fails to recognise it after it has been connected for a while.
>
> If I plug the equipment directly into the ports on the PC, there are no problem, so the ports are working fine, just when I add the equipment via this hub. On disconnecting and re-connecting, it works again, for a while!!
>
> This is the second hub to have this problem (different makes each one) so all I can presume is that it's something else.
>
> The PC spec is:
> 1.6GHz AMD K6 Processor
> 256Mb RAM
> Windows XP Professional O/S
>
> Any advice would be appreciated.
>
> Best regards, Pete Sowerby...........
>
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml
|
|
|