BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
Blind-Hams For blind ham radio operators <[log in to unmask]>
Date:
Sun, 14 Mar 2004 01:26:19 -0500
Reply-To:
Blind-Hams For blind ham radio operators <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
In-Reply-To:
<200403132019.1b2n5G4kd3NZFk70@mamo>
Content-Type:
text/plain; charset="iso-8859-1"
From:
Lynn Roberts N8LXK <[log in to unmask]>
Parts/Attachments:
text/plain (15 lines)
Shirley and I use the Ramsey fm-25. It broadcasts on a fm frequency
(selectable by internal switches) whatever audio comes in on the stereo
input. This particular model has many drawbacks for a visually impaired
assembler. 1. It comes in kit form with over 100 components to be
soldered into a circuit board. 2. The components leads are not trimmed
for mounting. 3. The circuit board has many traces spaced closer than
1/10 inch apart. 4.  The small components are not easily identified. 5.
Polarity sensitive components are only visually marked. There are more
reasons, but even with an assembled and tested unit, I wouldn't advise
this unit, unless the kit builder is willing to change frequencies if
necessary. A better option might be a wireless router and receiver.

Lynn
[log in to unmask]

ATOM RSS1 RSS2