Subject: | |
From: | |
Reply To: | |
Date: | Sun, 15 Feb 2004 10:10:32 +1300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Are you using a crossover cable between the 2 PC's? If not it's not going to
work unless you have the PC's connected to a Hub. If so make sure both PC's
are in the same workgroup, and that you have file and print sharing enabled
on both PC's (via Network properties). Also check that firewall software
isn't running, or at least configured to allow traffic on the local network,
you also need to share a folder or drive if you want to transfer data
between the 2 PC's.
Regards
Mike McNeil
While i'm at i'm having another problem. I have two system running win
98SE which i want to network. I'm using an Ethernet Lan Card on both
machine. Any of the 2 machines can't see their peers in the Network
Neighborhood.
My Ethernet Lan Card is bounded by TCP/IP setting of 198.160.100.1 for
one and 198.160.100.2 for the second one, with a SubMask of
255.255.255.0 for both. I use Full10 Mode for one while the other one
is set to Auto. Some times i've to set both toAuto as it will not get
pass over the Windows Splash Screen and i'll have to reboot using Safe
Mode with Network...
Can someone give me some tips about what i'm doing wrong?
Thanking you beforehand
Shakeel
Mauritius, Indian Ocean
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://freepctech.com
|
|
|