Subject: | |
From: | |
Reply To: | |
Date: | Sun, 2 May 2004 21:43:07 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
In my opinion...
I remember the SE440BX-2 as being the definition of dependability. The
440BX chipset was extremely stable. I would still prefer the 440BX over the
new 810 or 815 chipsets (which are not current anyway). The board will
accept a Celeron, Pentium 2 or Pentium 3 cpu. The original documentation
listed compatibility to 600 mhz, but I believe I've run a P3-800 on one
without any problem. Maximum FSB was 100 mhz, so even though it will accept
some older PC133 memory, some of the newer SDRAMs are NOT backward
compatible . Please check the Intel website for the latest motherboard
info. Please check a name brand memory vendor for compatability (Crucial,
Kingston, etc).
I'd recommend a P3-600 for your criteria. Its the fastest CPU which may not
need the BIOS upgraded. Many people liked the Celeron 300A because they
could overclock it to a 450. The one thing this board doesn't do well is
overclock. The price difference between a 300 and 600 is about $20. Prices
for faster CPUs go up much faster about the 600 as there were many fewer
made. If you select a Celeron, make sure that it is has onboard cache.
Ron Jobe
----- Original Message -----
From: "Robert Lendrim" <[log in to unmask]>
Subject: [PCBUILD] Selection of CPU for computer build
---snip---
> "This is a used tested Intel SE440BX-2
---snip---
> I'd appreciate advice concerning selection of a CPU. Speed is not a
primary
> consideration.
> I am concerned with compatibility, availability, dependability, bus speed
> considerations, etc.
> All suggestions, opinions, or other input would be appreciated.
> Thanks, Bob Lendrim
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://freepctech.com
|
|
|