Hi Brian,

Got the 2000 straightened out last evening, thanks.  As for the th-f6a, I've
re-programed the symplex freq's from the front of the radio, and will
download saved freq's to software to determine what I was doing wrong.

Thanks for your help.

Fred, N9BSO  [log in to unmask]
----- Original Message -----
From: "k5in" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, August 26, 2004 7:06 PM
Subject: Re: kenwood questions?


>     Hi Fred,
>
> On the thf-6a I am not sure but like Kevin said try the 7 key until you
hear
> no beep which is no pl encode and/or decode to be sure you don't have
> something else turned on.
>
> ts-2000: 440mhz type in your operating frequency, select fm, off set 5000
> yes, 5 thousand.  Also will need to select plus or minus.  If you are
doing
> this from the front of the radio the "zero" key is your off set.
>
> Hope this helps, Brian, k5in
> ----- Original Message -----
> From: "fred Olver" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, August 25, 2004 10:15 PM
> Subject: kenwood questions?
>
>
> Hi all,
>
> I have recently encountered a problem with my kenwood radios, and
ironicly,
> it's the same problem.
>
> When I use the software for the th-f6a and program in a symplex frequency,
> it doesn't hear on the simplex frequency but does transmit on it.  What am
I
> doing wrong?
>
> On a second kenwood radio, my ts-2000 I have tried programing in 440 mhz
> repeaters and am unable to transmit in to the repeater input,  do I need
to
> type in 5,000 or just 5000 for the off-set when using the software, and a
> second question question about programing from the front of the 2000, do I
> switch VFO's to program in the input frequency?
>
> Thanks in advance.
>
> Fred Olver, N9BSO  [log in to unmask]