Good point, Steve.

I guess I was just thinking of general instructions.  I know that one time
my beeps got turned off, I had to get sighted assistance, since I didn't
have the programming software at the time.

So, again, I was just giving general instructions.  It sounds like he got
the problem resolved with some help from a friend.

Aren't these radios fun sometimes?  HI!  HI!

Best 73 from Tom Behler: KB8TYJ

----- Original Message -----
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, July 26, 2004 1:23 PM
Subject: Re: TFH6A tones


> Tom,
>
> If the beep is off, he won't know where he is in the menus because there
> won't be a low beep to tell him where Menu 1 is.  His best bet is to
either
> use Lynn's procedure, or turn the beep on with the software.
>
> Steve
>
> On Sunday 7/25/04 14:13 Tom Behler wrote:
>
> >     Walt:
> >
> >Press the "menu" button.  It's the one in the middle of the round circle
on
> >the front of the rig.  Once you've pressed the "menu" button, use your
> >tuning knob to count clicks.  The menus start at menu 1, which is marked
by
> >a low beep.  Count up to 19, although keep in mind that, for some reason,
> >menu 4 isn't in the sequence.  Once you get to 19, move the "menu" button
up
> >or down to get your options.  Again, I think the "default" setting is
"on",
> >which should be indicated by the low beep.  Try this, and if it's the
other
> >setting, you should be able to figure that out via the process of
> >elimination.
> >
> >I think Lynn has given you some instructions for a "menu" re-set, but try
> >this first.
> >
> >Let us know how you make out.
> >
> >Best 73 from Tom Behler: KB8TYJ
> >
> >----- Original Message -----
> >From: "Walt Sebastian" <[log in to unmask]>
> >To: <[log in to unmask]>
> >Sent: Sunday, July 25, 2004 12:40 PM
> >Subject: Re: TFH6A tones
> >
> >
> > > Hi Tom,
> > > It partially helps.  Now, how do I get to menu 19?  Thanks and 73.
> > >
> > >
> > > Walt
> > > WA4QXT
> > > New London CT
> > > [log in to unmask]