Subject: | |
From: | |
Reply To: | |
Date: | Mon, 29 Dec 2003 12:23:30 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Mike,
If you are setting up the CD-RW to be a slave on the secondary IDE
controller, check to see if you are using cable select or a master/slave
relationship. If you are using cable select, both drives must have the
jumpers (located on the device) set to cable select. If you are using the
master/slave relationship, make sure the jumper on the CD-RW is set to
slave. Also, check your ATAPI setting in the bios (if your DVD works, I
assume it is enabled).
John
----- Original Message -----
From: <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, December 27, 2003 8:27 PM
Subject: [PCBUILD] Dell XPS T450 Acer CD-RW Won't Pickup
> I have a Dell Dimension XPS T450, Pentium III 450 Mhz, with 256 MB ram and
> Windows ME that won't pickup the CD-RW; an Acer 10x4x32. This CD-RW drive
is on
> the secondary IDE connector slave; in the master is DVD drive. The BIOS
will
> not let me selected a secondary slave device, the DVD is shown and Device
> Manager shows a yellow caution on the second IDE controller. I cannot
install
> the Dell IDE drivers as I have on access to either CD drive. I have
enabled
> both IDE controllers in both Windows and the BIOS. Any ideas will be much
> appreciated.
>
> Regards,
> Mike Scott
>
> PCBUILD maintains hundreds of useful files for download
> visit our download web page at:
> http://freepctech.com/downloads.shtml
PCBUILD maintains hundreds of useful files for download
visit our download web page at:
http://freepctech.com/downloads.shtml
|
|
|