I bet if you go to a local hamfest, or if you look on ebay, e-ham, or
other sites, you may be able to find one of those old Radio Shack HTx202's
around.  I have had one for the last 10 years, and they are real work
horses.  They are also fairly easy for blind hams to use, once you figure
out a few little quirks.

Keep us posted as to how you guys make out.

Best 73 from Tom Behler:  KB8TYJ

----- Original Message -----
From: "Carl Martin" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, July 15, 2003 2:48 PM
Subject: Re: looking for ht


> Hi Justin/Gary,
>          I am also shopping for an HT.  Two meters only is OK.  I have
> thought about the TH F6A but it is more than I need.  Are there any low
end
> HTs out there for $100 or there abouts that are accessable?
>
> Carl, W6RGH
>
>
> At 09:49 AM 7/15/2003 -0700, you wrote:
> >I would recommend the Kenwood thf6a.  It's the most accessible ht that
I've
> >seen, and it is quite small.
> >Justin
> >----- Original Message -----
> >From: "Gary Lee" <[log in to unmask]>
> >To: <[log in to unmask]>
> >Sent: Tuesday, July 15, 2003 6:25 AM
> >Subject: looking for ht
> >
> >
> > > --=======7CCD3E25=======
> > > Content-Type: text/plain; x-avg-checked=avg-ok-3F9E1322;
charset=us-ascii;
> >format=flowed
> > > Content-Transfer-Encoding: 8bit
> > >
> > > looking for a very small ht.  power is not a big concern, will be
using
> >for
> > > local repeater work.  Features needed, keypad, pl tones,
accessibility.
> > > 2 meter only is fine.  Size is primary concern.
> > >
> > > Anything anyone out there knows of coming close to this?
> > >
> > > THanks for the help.
> > >
> > > --=======7CCD3E25=======
> > > Content-Type: text/plain; charset=us-ascii; x-avg=cert;
> >x-avg-checked=avg-ok-3F9E1322
> > > Content-Disposition: inline
> > >
> > >
> > > ---
> > > Outgoing mail is certified Virus Free.
> > > Checked by AVG anti-virus system (http://www.grisoft.com).
> > > Version: 6.0.500 / Virus Database: 298 - Release Date: 7/10/03
> > >
> > > --=======7CCD3E25=======--