Subject: | |
From: | |
Reply To: | |
Date: | Thu, 25 Apr 2002 13:18:10 -0400 |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
On 440 though you have to set it for 5 MHz plit in most cases posetive,
and you press function and then the number 8 once, and that will put you
at +5 MHz split.
On Thu, 25 Apr 2002, Steve wrote:
> Hi Butch,
>
> I'm a new THF-6A user. Here's what to do:
>
> 1. Use the # key to enter the frequency entry mode. Second, enter the
> repeater output frequency. For example, 1 4 6 9 4 0.
>
> 2. If you need to select a PL frequency,, you use the 7 key to turn CTCSS
> on. When pressing the 7 key continuously, it will cycle as do all the
> controls on the THF-6a with the low tone being the default. Default is off.
> The first high beep following that turns tone on. The second high beep
> turns tone squelch on as well. The third is the DCS mode. You can get by
> with the first high tone to transmit a PL.
>
> 3. To select the PL, press the A key which is the function key, followed by
> the 7 key which puts you in tone select mode. The knob on the top of the HT
> dials among the forty-two different avaiable tones. The low beep is 67 HZ.
> The twelfth detent after the low beep is 100HZ.
>
> The menus should be enabled for automatic repeater offset, so once you enter
> the frequency you should be all set to go. Menu #5 is auto offset. The low
> tone is on.
>
> Steve K8sp
>
|
|
|