The process of repacing the drive should be rather simple mechanically.
The only thing to watch for is the ribbon cable connection. Some drives
and cables don't have a key to make sure you orient it corrctly, and I
have sometimes plugged the cable in backwards. The striped end (pin 1)
should usually be on the inside (near the center) of the drive.
Good luck.
Peter
------------------------
The NoSpin Group
[log in to unmask]
-----Original Message-----
I'm going to change out my A drive and have never done this before.
Does anyone have any tips as to what 'to-do' and what 'not to-do'? I'm
looking forward to building my own PC in the near future and this is my
first step in building my confidence. I've previously added a CD-RW,
and have put in and taken out sound cards, ethernet cards, etc. so I
feel somewhat comfortable tackling this. TIA
Dave
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://freepctech.com