On most mb's there is a jumper very near the battery. Usually this is the
jumper that will clear the bios. the jumper is normally set up on 2 of three
pins. Clearing the bios requires changing the jumper from pins 1 & 2 to pins
2&3 for just a few seconds. Then replace the jumper to its original
position. The bios should then be set back to all of its default settings.
If a bios upgrade was done anytime after the machine was originally set up,
the upgrade will also be gone, and in most cases, should be flashed again.
HTH...
Dean Kiley
----- Original Message -----
From: "Ariel Torres" <[log in to unmask]>
Subject: [PCBUILD] clearing bios
> Can you tell me how to clear the bios and reset it please I've never done
it before and it was recommended by one of you.
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://freepctech.com